# Production draft: Vanity, white

**Status:** Draft, made by rules in seconds. Nothing is measured on site, drawn by a designer or checked by an engineer; sizes come from room from the sentence.
**Prices:** From Demo shop (illustrative prices and lead times, not quotes), as imported 2026-11-17. The shop's rates are its own settings, not market rates.
**Brief:** "Bathroom vanity 1200mm, white gloss, soft-close drawers"

## What it is

1 units on 1 wall: 1 × vanity with basin.

## Assumed

- Ceiling height assumed 2600 mm.

## Materials

Chosen: **Balanced**. The best balance of the brief's priorities: $519, 4 days, 100% of materials from stock.

| Plan | Price | Days | From stock | Fit |
|---|---|---|---|---|
| Balanced ✓ | $519 | 4 | 100% | 96% |
| Lowest cost (same as Balanced) | $519 | 4 | 100% | 96% |
| Fastest (same as Balanced) | $519 | 4 | 100% | 96% |
| Most from stock (same as Balanced) | $519 | 4 | 100% | 96% |

| Used for | Material | Qty | From stock | To buy | Lead | Cost |
|---|---|---|---|---|---|---|
| carcass, front, drawer-box | MFC 18mm white moisture-resistant 2800x2070 (MFC18-WH-MR) | 1 sheet | 1 | – | in stock | $62 |
| slide | Undermount slide soft-close 400mm (pair) (SLD-UM-400) | 2 pair | 2 | – | in stock | $48 |
| back | HDF 3mm white moisture-resistant 2800x2070 (HDF3-WH-MR) | 1 sheet | 1 | – | in stock | $21 |
| handle | Bar handle 320mm stainless (HDL-320-SS) | 2 each | 2 | – | in stock | $10 |
| connector | Wall hanging bracket (CON-WB) | 2 each | 2 | – | in stock | $4 |
| edge-carcass, edge-front | ABS edge band 1mm white 22mm 200m (EB1-WH) | 0.1 roll | 0.1 | – | in stock | $3 |
| connector | Panel connector (CON-PNL) | 8 each | 8 | – | in stock | $1 |
| connector | Confirmat screw 7x50 (CON-CONF) | 24 each | 24 | – | in stock | $1 |

## Cutting

- MFC18-WH-MR: 1 board, 60% average use
- HDF3-WH-MR: 1 board, 26% average use
- Remnants to keep: MFC18-WH-MR 1515 × 1124; HDF3-WH-MR 1876 × 1646; HDF3-WH-MR 850 × 496; HDF3-WH-MR 908 × 400

## Hardware and metal

| | Item | Qty | From stock | To buy | Used in |
|---|---|---|---|---|---|
| Drawer slides | Undermount slide soft-close 400mm (pair) (SLD-UM-400) | 2 pair | 2 | – | Ab01 ×2 |
| Fixings | Confirmat screw 7x50 (CON-CONF) | 24 each | 24 | – | Ab01 ×24 |
| Fixings | Panel connector (CON-PNL) | 8 each | 8 | – | Ab01 ×8 |
| Fixings | Wall hanging bracket (CON-WB) | 2 each | 2 | – | Ab01 ×2 |
| Handles | Bar handle 320mm stainless (HDL-320-SS) | 2 each | 2 | – | Ab01 ×2 |

## Drilling

84 holes in 17 parts, 8 drilling patterns (drawings/drilling.svg). Every hole, with its face, position, diameter and depth, is in drilling.csv; the cutting DXF carries them on one layer per tool.

- confirmat: 24
- confirmat edge: 24
- slide fixing: 8
- slide: 8
- panel connector: 8
- handle: 4
- front fixing: 4
- hanging bracket: 4

## Hours and price

- Cut 20 parts from 2 boards: 0.47 h (saw)
- Edge 25 edges: 0.17 h (edge bander)
- Drill 84 holes in 17 parts: 0.22 h (CNC)
- Assemble 1 units, 2 drawers, hang 0 doors: 0.9 h
- Pack 1 units: 0.17 h
- Install 1 units and 0 worktops: 1.2 h

Materials $149, labour $141, machines $26, overhead $47, margin $156: **$519**.

## Schedule

4 days: materials 0, shop 3, finishing 0, fitting 1. Longest: 3 days in the shop.

## What isn't done

- No site survey: every size is from the sentence or the plan given.
- Appliances, sinks and taps are the client's; their cut-outs follow their templates.
- Joinery, drilling patterns and hardware positions follow the shop's standard; nothing is checked against a real fitting's datasheet.
- The Design and Engineering steps make the drawings a fitter works from; this is a draft to price and plan with.
