# Production draft: 40 × Wardrobes, oak

**Status:** Draft, made by rules in seconds. Nothing is measured on site, drawn by a designer or checked by an engineer; sizes come from room from the sentence.
**Prices:** From Demo shop (illustrative prices and lead times, not quotes), as imported 2026-11-17. The shop's rates are its own settings, not market rates.
**Brief:** "40 identical 2.4m wardrobes for a hotel, oak, from our stock, in 8 weeks"

## What it is

3 units on 1 wall, 40 sets: 1 × hanging, 1 × drawers and hanging, 1 × shelves.

## Assumed

- Ceiling height assumed 2600 mm.
- Wardrobes 2400 mm tall on a 100 mm plinth; the 100 mm above is closed with a top filler.

## Materials

Chosen: **Lowest cost**. Lowest cost. Against the balanced mix it is $197 less, the same 41 days, 2 points less from stock.

| Plan | Price | Days | From stock | Fit |
|---|---|---|---|---|
| Balanced | $69,687 | 41 | 32% | 93% |
| Lowest cost ✓ | $69,490 | 41 | 30% | 95% |
| Fastest (same as Lowest cost) | $69,490 | 41 | 30% | 95% |
| Most from stock | $69,924 | 41 | 33% | 91% |

| Used for | Material | Qty | From stock | To buy | Lead | Cost |
|---|---|---|---|---|---|---|
| carcass | MFC 18mm white 2800x2070 (MFC18-WH) | 147 sheet | 40 | 107 | 5 d | $7,074 |
| front | MFC 18mm natural oak 2800x2070 (MFC18-OAK) | 70 sheet | 12 | 58 | 7 d | $4,060 |
| hinge | Clip hinge 110 soft-close (HNG-SC) | 1200 each | 300 | 900 | 5 d | $3,840 |
| slide | Undermount slide soft-close 500mm (pair) (SLD-UM-500) | 120 pair | 10 | 110 | 14 d | $2,880 |
| back | HDF 3mm white 2800x2070 back panel (HDF3-WH) | 70 sheet | 60 | 10 | 3 d | $980 |
| edge-front | ABS edge band 1mm natural oak 22mm 100m (EB1-OAK) | 22.5 roll | 3 | 20 | 7 d | $788 |
| handle | Bar handle 160mm stainless (HDL-160-SS) | 240 each | 150 | 90 | 7 d | $768 |
| handle | Bar handle 320mm stainless (HDL-320-SS) | 120 each | 30 | 90 | 7 d | $588 |
| drawer-box | MFC 16mm white 2800x2070 (MFC16-WH) | 11 sheet | 11 | – | in stock | $462 |
| leg | Adjustable leg 100-150mm (LEG-ADJ) | 480 each | 400 | 80 | 5 d | $456 |
| rail | Oval wardrobe rail chrome 3000mm (RAIL-OVL) | 27 bar | 20 | 7 | 3 d | $243 |
| edge-carcass | ABS edge band 1mm white 22mm 200m (EB1-WH) | 7.45 roll | 7.45 | – | in stock | $209 |
| connector | Confirmat screw 7x50 (CON-CONF) | 2560 each | 2560 | – | in stock | $102 |
| rail-support | Rail support chrome (RS-CHR) | 160 each | 100 | 60 | 5 d | $96 |
| connector | Plinth clip (CON-PC) | 240 each | 240 | – | in stock | $72 |
| shelf-support | Shelf pin 5mm (PIN-5) | 800 each | 800 | – | in stock | $24 |
| connector | Panel connector (CON-PNL) | 160 each | 160 | – | in stock | $24 |

## Cutting

- MFC18-OAK: 70 boards, 82% average use
- MFC18-WH: 150 boards (3 from remnants), 69% average use
- HDF3-WH: 70 boards, 66% average use
- MFC16-WH: 11 boards, 81% average use
- Remnants to keep: MFC18-OAK 454 × 376; MFC18-OAK 438 × 376; MFC18-OAK 466 × 376; MFC18-OAK 385 × 376; MFC18-OAK 610 × 379; MFC18-OAK 392 × 379; MFC18-OAK 392 × 379; MFC18-OAK 466 × 379; and 797 more

## Hardware and metal

| | Item | Qty | From stock | To buy | Used in |
|---|---|---|---|---|---|
| Drawer slides | Undermount slide soft-close 500mm (pair) (SLD-UM-500) | 120 pair | 10 | 110 | At03 ×120 |
| Fixings | Confirmat screw 7x50 (CON-CONF) | 2560 each | 2560 | – | At02 ×480 At03 ×1600 At04 ×480 |
| Fixings | Panel connector (CON-PNL) | 160 each | 160 | – | At04 ×160 |
| Fixings | Plinth clip (CON-PC) | 240 each | 240 | – | At ×240 |
| Fixings | Shelf pin 5mm (PIN-5) | 800 each | 800 | – | At04 ×800 |
| Handles | Bar handle 160mm stainless (HDL-160-SS) | 240 each | 150 | 90 | At02 ×80 At03 ×80 At04 ×80 |
| Handles | Bar handle 320mm stainless (HDL-320-SS) | 120 each | 30 | 90 | At03 ×120 |
| Hinges | Clip hinge 110 soft-close (HNG-SC) | 1200 each | 300 | 900 | At02 ×400 At03 ×400 At04 ×400 |
| Legs and feet | Adjustable leg 100-150mm (LEG-ADJ) | 480 each | 400 | 80 | At02 ×160 At03 ×160 At04 ×160 |
| Wardrobe fittings | Oval wardrobe rail chrome 3000mm (RAIL-OVL) | 27 bar | 20 | 7 | At02 ×40 At03 ×40 |
| Wardrobe fittings | Rail support chrome (RS-CHR) | 160 each | 100 | 60 | At02 ×80 At03 ×80 |

Bars are cut as listed in metal-cutlist.csv: 27 bars, 80 pieces.

## Drilling

25120 holes in 1560 parts, 22 drilling patterns (drawings/drilling.svg). Every hole, with its face, position, diameter and depth, is in drilling.csv; the cutting DXF carries them on one layer per tool.

- shelf pin: 10880
- confirmat: 2560
- confirmat edge: 2560
- hinge dowel: 2400
- hinge plate: 2400
- hinge cup: 1200
- handle: 720
- leg: 480
- slide fixing: 480
- slide: 480
- rail support: 320
- front fixing: 240
- plinth clip: 240
- panel connector: 160

## Hours and price

- Cut 2080 parts from 301 boards: 60.93 h (saw)
- Edge 2960 edges: 19.73 h (edge bander)
- Drill 25120 holes in 1560 parts: 32.31 h (CNC)
- Assemble 120 units, 120 drawers, hang 0 doors: 84 h
- Pack 120 units: 20 h
- Install 120 units and 0 worktops: 144 h

Materials $22,665, labour $16,244, machines $3,389, overhead $6,345, margin $20,847: **$69,490** ($1,737 a set).

## Schedule

41 days: materials 14, shop 18, finishing 0, fitting 9. Longest: 18 days in the shop; waiting 14 days for Undermount slide soft-close 500mm (pair).

## What isn't done

- No site survey: every size is from the sentence or the plan given.
- Appliances, sinks and taps are the client's; their cut-outs follow their templates.
- Joinery, drilling patterns and hardware positions follow the shop's standard; nothing is checked against a real fitting's datasheet.
- The Design and Engineering steps make the drawings a fitter works from; this is a draft to price and plan with.
