# Production draft: U-shaped kitchen, anthracite handleless, with island

**Status:** Draft, made by rules in seconds. Nothing is measured on site, drawn by a designer or checked by an engineer; sizes come from room from the sentence.
**Prices:** From Demo shop (illustrative prices and lead times, not quotes), as imported 2026-11-17. The shop's rates are its own settings, not market rates.
**Brief:** "U-shaped handleless kitchen in anthracite, 5 x 4.2 m, with an island and a pantry"

## What it is

33 units on 4 walls: 1 × blind corner, 9 × double door base, 1 × sink base, 1 × pantry, 1 × fridge housing (integrated), 1 × corner wall unit, 13 × wall unit, 2 × drawers, 1 × hob over oven, 1 × over the hood, 2 × island drawers.
Worktops: 3770 × 598 mm (sink cut-out); 3602 × 598 mm (hob cut-out); 2652 × 598 mm; 1800 × 920 mm.

## Assumed

- Ceiling height assumed 2600 mm.
- Not named, so assumed: sink, hob, oven, fridge.
- No worktop named; laminate.
- Island 1760 × 900 mm, drawers facing the main run, seating behind; 1150 mm to the main run's worktop, 1532 mm behind it, at least 1000 mm at its ends.

## Materials

Chosen: **Balanced**. The best balance of the brief's priorities: $12,692, 38 days, 71% of materials from stock.

| Plan | Price | Days | From stock | Fit |
|---|---|---|---|---|
| Balanced ✓ | $12,692 | 38 | 71% | 86% |
| Lowest cost (same as Balanced) | $12,692 | 38 | 71% | 86% |
| Fastest | $16,125 | 39 | 31% | 86% |
| Most from stock (same as Balanced) | $12,692 | 38 | 71% | 86% |

| Used for | Material | Qty | From stock | To buy | Lead | Cost |
|---|---|---|---|---|---|---|
| worktop | Compact HPL 12mm black 3050x1300 (HPL12-BLK) | 4 sheet | 2 | 2 | 30 d | $1,240 |
| carcass | MFC 18mm white 2800x2070 (MFC18-WH) | 10 sheet | 10 | – | in stock | $505 |
| slide | Undermount slide soft-close 550mm (pair) (SLD-UM-550) | 13 pair | 13 | – | in stock | $312 |
| front | MFC 18mm anthracite 2800x2070 (MFC18-ANT) | 5 sheet | 0 | 5 | 14 d | $280 |
| hinge | Clip hinge 110 soft-close (HNG-SC) | 85 each | 85 | – | in stock | $272 |
| handle-profile | Aluminium J handle profile black 3000mm (HP-J-BLK) | 10 bar | 10 | – | in stock | $220 |
| drawer-box | MFC 16mm white 2800x2070 (MFC16-WH) | 2 sheet | 2 | – | in stock | $84 |
| leg | Adjustable leg 100-150mm (LEG-ADJ) | 78 each | 78 | – | in stock | $74 |
| back | HDF 3mm white 2800x2070 back panel (HDF3-WH) | 5 sheet | 5 | – | in stock | $70 |
| edge-front | ABS edge band 1mm black 22mm 100m (EB1-BLK) | 1.87 roll | 1.87 | – | in stock | $56 |
| connector | Wall hanging bracket (CON-WB) | 30 each | 30 | – | in stock | $54 |
| edge-carcass | ABS edge band 1mm white 22mm 200m (EB1-WH) | 0.95 roll | 0.95 | – | in stock | $26 |
| connector | Confirmat screw 7x50 (CON-CONF) | 376 each | 376 | – | in stock | $15 |
| connector | Plinth clip (CON-PC) | 32 each | 32 | – | in stock | $10 |
| connector | Panel connector (CON-PNL) | 38 each | 38 | – | in stock | $6 |
| shelf-support | Shelf pin 5mm (PIN-5) | 168 each | 168 | – | in stock | $5 |

## Cutting

- MFC18-ANT: 5 boards, 79% average use
- MFC18-WH: 14 boards (4 from remnants), 83% average use
- HDF3-WH: 5 boards, 72% average use
- MFC16-WH: 2 boards, 48% average use
- HPL12-BLK: 4 boards, 48% average use
- Remnants to keep: MFC18-ANT 620 × 432; MFC18-ANT 625 × 580; MFC18-ANT 600 × 597; MFC18-ANT 608 × 397; MFC18-ANT 566 × 367; MFC18-ANT 557 × 367; MFC18-ANT 753 × 435; MFC18-ANT 680 × 325; and 29 more

## Hardware and metal

| | Item | Qty | From stock | To buy | Used in |
|---|---|---|---|---|---|
| Drawer slides | Undermount slide soft-close 550mm (pair) (SLD-UM-550) | 13 pair | 13 | – | Db03 ×3 Db04 ×1 Db05 ×3 Ib01 ×3 Ib02 ×3 |
| Fixings | Confirmat screw 7x50 (CON-CONF) | 376 each | 376 | – | Ab02 ×8 Ab03 ×8 Ab04 ×8 Ab05 ×8 Ab06 ×8 Ab07 ×12 … |
| Fixings | Panel connector (CON-PNL) | 38 each | 38 | – | Ab07 ×4 Aw03 ×4 Aw04 ×4 Bb05 ×4 Bw05 ×4 Ib01 ×4 … |
| Fixings | Plinth clip (CON-PC) | 32 each | 32 | – | Ab ×11 Db ×9 Bb ×7 Ib ×5 |
| Fixings | Shelf pin 5mm (PIN-5) | 168 each | 168 | – | Ab02 ×4 Ab03 ×4 Ab05 ×4 Ab06 ×4 Ab07 ×16 Aw02 ×8 … |
| Fixings | Wall hanging bracket (CON-WB) | 30 each | 30 | – | Aw02 ×2 Aw03 ×2 Aw04 ×2 Aw05 ×2 Dw02 ×2 Dw03 ×2 … |
| Handle profiles | Aluminium J handle profile black 3000mm (HP-J-BLK) | 10 bar | 10 | – | Ab02 ×1 Ab03 ×2 Ab04 ×2 Ab05 ×2 Ab06 ×2 Ab07 ×2 … |
| Hinges | Clip hinge 110 soft-close (HNG-SC) | 85 each | 85 | – | Ab02 ×2 Ab03 ×4 Ab04 ×4 Ab05 ×4 Ab06 ×4 Ab07 ×5 … |
| Legs and feet | Adjustable leg 100-150mm (LEG-ADJ) | 78 each | 78 | – | Ab02 ×6 Ab03 ×4 Ab04 ×4 Ab05 ×4 Ab06 ×4 Ab07 ×4 … |

Bars are cut as listed in metal-cutlist.csv: 10 bars, 57 pieces.

## Drilling

3339 holes in 257 parts, 92 drilling patterns (drawings/drilling.svg). Every hole, with its face, position, diameter and depth, is in drilling.csv; the cutting DXF carries them on one layer per tool.

- shelf pin: 1772
- confirmat: 376
- confirmat edge: 376
- hinge dowel: 170
- hinge plate: 170
- hinge cup: 85
- leg: 78
- slide fixing: 78
- slide: 78
- hanging bracket: 60
- panel connector: 38
- plinth clip: 32
- front fixing: 26

## Hours and price

- Cut 370 parts from 30 boards: 7.7 h (saw)
- Edge 502 edges: 3.35 h (edge bander)
- Drill 3339 holes in 257 parts: 4.74 h (CNC)
- Assemble 33 units, 13 drawers, hang 14 doors: 20.5 h
- Pack 33 units: 5.5 h
- Install 33 units and 4 worktops: 47.6 h

Materials $3,229, labour $4,023, machines $474, overhead $1,159, margin $3,808: **$12,692**.

## Schedule

38 days: materials 30, shop 5, finishing 0, fitting 3. Longest: waiting 30 days for Compact HPL 12mm black 3050x1300; 5 days in the shop.

## Check before approving

- The fridge's door kit fixes the housing's doors; no hinges counted for them.
- Materials: no laminate-worktop big enough for worktop; another material used.
- Nesting: Ab-PL (5000 mm) is cut in 2 pieces and jointed.
- Nesting: Db-PL (3620 mm) is cut in 2 pieces and jointed.
- Nesting: At1-WT (3770 mm) is cut in 2 pieces and jointed.
- Nesting: Dt1-WT (3602 mm) is cut in 2 pieces and jointed.

## What isn't done

- No site survey: every size is from the sentence or the plan given.
- Appliances, sinks and taps are the client's; their cut-outs follow their templates.
- Joinery, drilling patterns and hardware positions follow the shop's standard; nothing is checked against a real fitting's datasheet.
- The Design and Engineering steps make the drawings a fitter works from; this is a draft to price and plan with.
