# Production draft: L-shaped kitchen, white

**Status:** Draft, made by rules in seconds. Nothing is measured on site, drawn by a designer or checked by an engineer; sizes come from DXF.
**Prices:** From Demo shop (illustrative prices and lead times, not quotes), as imported 2026-11-17. The shop's rates are its own settings, not market rates.
**Brief:** "Budget L-shaped kitchen for a rental flat, white, laminate worktop, no dishwasher"

## What it is

16 units on 2 walls: 1 × blind corner, 3 × door base, 1 × sink base, 1 × space for a freestanding fridge, 1 × corner wall unit, 5 × wall unit, 1 × double door base, 1 × hob over oven, 1 × drawers, 1 × over the hood.
Worktops: 3470 × 598 mm (sink cut-out); 2302 × 598 mm (hob cut-out).

## Assumed

- Ceiling height assumed 2600 mm.
- Not named, so assumed: sink, hob, oven, fridge.

## Materials

Chosen: **Balanced**. The best balance of the brief's priorities: $4,507, 6 days, 97% of materials from stock.

| Plan | Price | Days | From stock | Fit |
|---|---|---|---|---|
| Balanced ✓ | $4,507 | 6 | 97% | 97% |
| Lowest cost (same as Balanced) | $4,507 | 6 | 97% | 97% |
| Fastest (same as Balanced) | $4,507 | 6 | 97% | 97% |
| Most from stock (same as Balanced) | $4,507 | 6 | 97% | 97% |

| Used for | Material | Qty | From stock | To buy | Lead | Cost |
|---|---|---|---|---|---|---|
| carcass, drawer-box | MFC 18mm white 2800x2070 (MFC18-WH) | 4 sheet | 4 | – | in stock | $217 |
| worktop | Laminate worktop 38mm white 4100x600 (WT38-WH) | 2 bar | 2 | – | in stock | $170 |
| front | MFC 16mm white 2800x2070 (MFC16-WH) | 2 sheet | 2 | – | in stock | $84 |
| handle | Bar handle 160mm stainless (HDL-160-SS) | 20 each | 20 | – | in stock | $64 |
| hinge | Clip hinge 110 standard (HNG-STD) | 38 each | 38 | – | in stock | $42 |
| leg | Adjustable leg 100-150mm (LEG-ADJ) | 38 each | 38 | – | in stock | $36 |
| slide | Ball-bearing slide 550mm (pair) (SLD-BB-550) | 4 pair | 4 | – | in stock | $30 |
| back | HDF 3mm white 2800x2070 back panel (HDF3-WH) | 2 sheet | 2 | – | in stock | $28 |
| connector | Wall hanging bracket (CON-WB) | 14 each | 14 | – | in stock | $25 |
| edge-front, edge-carcass | ABS edge band 1mm white 22mm 200m (EB1-WH) | 0.77 roll | 0.77 | – | in stock | $21 |
| handle | Bar handle 320mm stainless (HDL-320-SS) | 3 each | 3 | – | in stock | $15 |
| connector | Confirmat screw 7x50 (CON-CONF) | 152 each | 152 | – | in stock | $6 |
| connector | Plinth clip (CON-PC) | 14 each | 14 | – | in stock | $4 |
| shelf-support | Shelf pin 5mm (PIN-5) | 68 each | 68 | – | in stock | $2 |
| connector | Panel connector (CON-PNL) | 8 each | 8 | – | in stock | $1 |

## Cutting

- MFC16-WH: 2 boards, 71% average use
- MFC18-WH: 8 boards (4 from remnants), 85% average use
- HDF3-WH: 2 boards, 74% average use
- Remnants to keep: MFC16-WH 688 × 496; MFC16-WH 547 × 518; MFC16-WH 547 × 496; MFC16-WH 602 × 537; MFC16-WH 608 × 412; MFC16-WH 521 × 340; MFC18-WH 1225 × 973; HDF3-WH 716 × 530; and 4 more

## Hardware and metal

| | Item | Qty | From stock | To buy | Used in |
|---|---|---|---|---|---|
| Drawer slides | Ball-bearing slide 550mm (pair) (SLD-BB-550) | 4 pair | 4 | – | W4b03 ×1 W4b04 ×3 |
| Fixings | Confirmat screw 7x50 (CON-CONF) | 152 each | 152 | – | W1b02 ×8 W1b03 ×8 W1b04 ×8 W1b05 ×8 W1b06 ×8 W1w02 ×8 … |
| Fixings | Panel connector (CON-PNL) | 8 each | 8 | – | W1w03 ×4 W1w04 ×4 |
| Fixings | Plinth clip (CON-PC) | 14 each | 14 | – | W1b ×8 W4b ×6 |
| Fixings | Shelf pin 5mm (PIN-5) | 68 each | 68 | – | W1b02 ×4 W1b03 ×4 W1b05 ×4 W1b06 ×4 W1w02 ×8 W1w03 ×8 … |
| Fixings | Wall hanging bracket (CON-WB) | 14 each | 14 | – | W1w02 ×2 W1w03 ×2 W1w04 ×2 W4w02 ×2 W4w03 ×2 W4w04 ×2 … |
| Handles | Bar handle 160mm stainless (HDL-160-SS) | 20 each | 20 | – | W1b02 ×1 W1b03 ×1 W1b04 ×2 W1b05 ×1 W1b06 ×1 W1w02 ×2 … |
| Handles | Bar handle 320mm stainless (HDL-320-SS) | 3 each | 3 | – | W4b04 ×3 |
| Hinges | Clip hinge 110 standard (HNG-STD) | 38 each | 38 | – | W1b02 ×2 W1b03 ×2 W1b04 ×4 W1b05 ×2 W1b06 ×2 W1w02 ×4 … |
| Legs and feet | Adjustable leg 100-150mm (LEG-ADJ) | 38 each | 38 | – | W1b02 ×6 W1b03 ×4 W1b04 ×4 W1b05 ×4 W1b06 ×4 W4b02 ×6 … |

## Drilling

1388 holes in 112 parts, 62 drilling patterns (drawings/drilling.svg). Every hole, with its face, position, diameter and depth, is in drilling.csv; the cutting DXF carries them on one layer per tool.

- shelf pin: 704
- confirmat: 152
- confirmat edge: 152
- hinge dowel: 76
- hinge plate: 76
- handle: 46
- hinge cup: 38
- leg: 38
- hanging bracket: 28
- slide fixing: 24
- slide: 24
- plinth clip: 14
- panel connector: 8
- front fixing: 8

## Hours and price

- Cut 154 parts from 12 boards: 3.14 h (saw)
- Edge 207 edges: 1.38 h (edge bander)
- Drill 1388 holes in 112 parts: 2.01 h (CNC)
- Assemble 15 units, 4 drawers, hang 7 doors: 9 h
- Pack 15 units: 2.5 h
- Install 15 units and 2 worktops: 22 h

Materials $746, labour $1,801, machines $196, overhead $412, margin $1,352: **$4,507**.

## Schedule

6 days: materials 0, shop 4, finishing 0, fitting 2. Longest: 4 days in the shop.

## Check before approving

- Read 4 walls and 2 openings from the drawing; the Space step checks them against the plan.
- Nesting: W1b-PL (3500 mm) is cut in 2 pieces and jointed.

## What isn't done

- No site survey: every size is from the sentence or the plan given.
- Appliances, sinks and taps are the client's; their cut-outs follow their templates.
- Joinery, drilling patterns and hardware positions follow the shop's standard; nothing is checked against a real fitting's datasheet.
- The Design and Engineering steps make the drawings a fitter works from; this is a draft to price and plan with.
