# Production draft: L-shaped kitchen, white shaker

**Status:** Draft, made by rules in seconds. Nothing is measured on site, drawn by a designer or checked by an engineer; sizes come from room from the sentence.
**Prices:** From Demo shop (illustrative prices and lead times, not quotes), as imported 2026-11-17. The shop's rates are its own settings, not market rates.
**Brief:** "White shaker L-shaped kitchen, 3.6 x 3 m, quartz worktop, dishwasher, in 4 weeks, budget $15k"

## What it is

16 units on 2 walls: 1 × blind corner, 1 × sink base, 1 × dishwasher (integrated), 1 × door base, 1 × fridge housing (integrated), 1 × corner wall unit, 6 × wall unit, 1 × double door base, 1 × hob over oven, 1 × drawers, 1 × over the hood.
Worktops: 2970 × 598 mm (sink cut-out); 2402 × 598 mm (hob cut-out).

## Assumed

- Ceiling height assumed 2600 mm.
- Shaker doors are made as painted MDF with a routed frame.
- Not named, so assumed: sink, hob, oven, fridge.

## Materials

Chosen: **Balanced**. The best balance of the brief's priorities: $8,139, 28 days, 40% of materials from stock.

| Plan | Price | Days | From stock | Fit |
|---|---|---|---|---|
| Balanced ✓ | $8,139 | 28 | 40% | 96% |
| Lowest cost (same as Balanced) | $8,139 | 28 | 40% | 96% |
| Fastest (same as Balanced) | $8,139 | 28 | 40% | 96% |
| Most from stock (same as Balanced) | $8,139 | 28 | 40% | 96% |

| Used for | Material | Qty | From stock | To buy | Lead | Cost |
|---|---|---|---|---|---|---|
| worktop | Quartz worktop 20mm white, fabricated (QTZ20-WH) | 3.37 m2 | 0 | 3.37 | 10 d | $1,415 |
| carcass | MFC 18mm white 2800x2070 (MFC18-WH) | 4 sheet | 4 | – | in stock | $217 |
| front | MDF 18mm 2440x1220 paint grade (MDF18) | 5 sheet | 5 | – | in stock | $190 |
| finish | 2K paint system white (primer and top coat) (PNT-WH) | 7.9 l | 7.9 | – | in stock | $174 |
| hinge | Clip hinge 110 soft-close (HNG-SC) | 30 each | 30 | – | in stock | $96 |
| slide | Undermount slide soft-close 550mm (pair) (SLD-UM-550) | 4 pair | 4 | – | in stock | $96 |
| handle | Bar handle 160mm stainless (HDL-160-SS) | 19 each | 19 | – | in stock | $61 |
| drawer-box | MFC 16mm white 2800x2070 (MFC16-WH) | 1 sheet | 1 | – | in stock | $42 |
| leg | Adjustable leg 100-150mm (LEG-ADJ) | 34 each | 34 | – | in stock | $32 |
| connector | Wall hanging bracket (CON-WB) | 16 each | 16 | – | in stock | $29 |
| back | HDF 3mm white 2800x2070 back panel (HDF3-WH) | 2 sheet | 2 | – | in stock | $28 |
| handle | Bar handle 320mm stainless (HDL-320-SS) | 3 each | 3 | – | in stock | $15 |
| edge-carcass | ABS edge band 1mm white 22mm 200m (EB1-WH) | 0.39 roll | 0.39 | – | in stock | $11 |
| connector | Confirmat screw 7x50 (CON-CONF) | 156 each | 156 | – | in stock | $6 |
| connector | Plinth clip (CON-PC) | 13 each | 13 | – | in stock | $4 |
| shelf-support | Shelf pin 5mm (PIN-5) | 68 each | 68 | – | in stock | $2 |
| connector | Panel connector (CON-PNL) | 12 each | 12 | – | in stock | $2 |

## Cutting

- MDF18: 5 boards, 65% average use
- MFC18-WH: 8 boards (4 from remnants), 84% average use
- HDF3-WH: 2 boards, 67% average use
- MFC16-WH: 1 board, 27% average use
- Remnants to keep: MDF18 476 × 340; MDF18 572 × 479; MDF18 659 × 402; MDF18 537 × 402; MDF18 479 × 437; MDF18 479 × 437; MDF18 1699 × 1200; MFC18-WH 1220 × 1066; and 6 more

## Hardware and metal

| | Item | Qty | From stock | To buy | Used in |
|---|---|---|---|---|---|
| Drawer slides | Undermount slide soft-close 550mm (pair) (SLD-UM-550) | 4 pair | 4 | – | Db03 ×1 Db04 ×3 |
| Fixings | Confirmat screw 7x50 (CON-CONF) | 156 each | 156 | – | Ab02 ×8 Ab03 ×8 Ab05 ×8 Ab06 ×12 Aw02 ×8 Aw03 ×8 … |
| Fixings | Panel connector (CON-PNL) | 12 each | 12 | – | Ab06 ×4 Aw03 ×4 Aw04 ×4 |
| Fixings | Plinth clip (CON-PC) | 13 each | 13 | – | Ab ×7 Db ×6 |
| Fixings | Shelf pin 5mm (PIN-5) | 68 each | 68 | – | Ab02 ×4 Ab05 ×4 Aw02 ×8 Aw03 ×8 Aw04 ×8 Aw05 ×8 … |
| Fixings | Wall hanging bracket (CON-WB) | 16 each | 16 | – | Aw02 ×2 Aw03 ×2 Aw04 ×2 Aw05 ×2 Dw02 ×2 Dw03 ×2 … |
| Handles | Bar handle 160mm stainless (HDL-160-SS) | 19 each | 19 | – | Ab02 ×1 Ab03 ×2 Ab04 ×1 Ab05 ×1 Ab06 ×2 Aw02 ×1 … |
| Handles | Bar handle 320mm stainless (HDL-320-SS) | 3 each | 3 | – | Db04 ×3 |
| Hinges | Clip hinge 110 soft-close (HNG-SC) | 30 each | 30 | – | Ab02 ×2 Ab03 ×4 Ab05 ×2 Aw02 ×2 Aw03 ×2 Aw04 ×2 … |
| Legs and feet | Adjustable leg 100-150mm (LEG-ADJ) | 34 each | 34 | – | Ab02 ×6 Ab03 ×4 Ab05 ×4 Ab06 ×4 Db02 ×6 Db03 ×4 … |

## Drilling

1287 holes in 108 parts, 60 drilling patterns (drawings/drilling.svg). Every hole, with its face, position, diameter and depth, is in drilling.csv; the cutting DXF carries them on one layer per tool.

- shelf pin: 640
- confirmat: 156
- confirmat edge: 156
- hinge dowel: 60
- hinge plate: 60
- handle: 38
- leg: 34
- hanging bracket: 32
- hinge cup: 30
- slide fixing: 24
- slide: 24
- plinth clip: 13
- panel connector: 12
- front fixing: 8

## Hours and price

- Cut 152 parts from 16 boards: 3.65 h (saw)
- Edge 101 edges: 0.67 h (edge bander)
- Drill 1287 holes in 108 parts: 1.91 h (CNC)
- Assemble 15 units, 4 drawers, hang 9 doors: 9.2 h
- Prime and paint 21.0 m²: 7.34 h (spray booth)
- Pack 15 units: 2.5 h
- Install 15 units and 2 worktops: 22 h

Materials $2,420, labour $2,127, machines $407, overhead $743, margin $2,442: **$8,139**.

## Schedule

28 days: materials 0, shop 4, finishing 5, fitting 2, stone worktop 17. Longest: 17 days to template and fabricate the stone worktop after the units are in; 5 days painting and drying.

## Check before approving

- The fridge's door kit fixes the housing's doors; no hinges counted for them.
- Nesting: Ab-PL (3000 mm) is cut in 2 pieces and jointed.

## What isn't done

- No site survey: every size is from the sentence or the plan given.
- Appliances, sinks and taps are the client's; their cut-outs follow their templates.
- Joinery, drilling patterns and hardware positions follow the shop's standard; nothing is checked against a real fitting's datasheet.
- The Design and Engineering steps make the drawings a fitter works from; this is a draft to price and plan with.
