Walnut TV unit
TV unit 2.4m walnut veneer, wall-hung, soft-close
- Price
- $1,909
- Days to fitted
- 37
- From stock
- 31%
- Boards
- 8 55% used
Balanced materials, recommended. The best balance of the brief's priorities: $1,909, 37 days, 31% of materials from stock.
Nothing in stock. The client asked for walnut and the shop has none: the veneer is weeks away, and the schedule shows that waiting is the longest part of the job.
Overview
- 1ReadThe sentence as a brief, every guess listed.
- 2Fit3 units on 1 wall, clear of doors and windows.
- 3ChooseFour material plans weighed; balanced recommended.
- 4Cut8 boards, 55% used.
- 5Drill152 holes in 29 parts.
- 6Price$1,909, 37 days.
What Vekvik read
Assumed, for the shop to correct
- Ceiling height assumed 2600 mm.
Design
3 units on 1 wall. Pick a unit on the drawings or in the list to see its parts, holes and hardware.
Materials
Four plans, one recommended
| Plan | Price | Days | Stock | Fit |
|---|---|---|---|---|
| Balanced | $1,909 | 37 | 31% | 96% |
| Lowest cost | $2,133 | 37 | 23% | 96% |
| Fastest = Balanced | $1,909 | 37 | 31% | 96% |
| Most from stock = Balanced | $1,909 | 37 | 31% | 96% |
The best balance of the brief's priorities: $1,909, 37 days, 31% of materials from stock.
Requirements are hard; cost, lead time, the shop's stock and fit are weighed. Each plan is nested, priced and scheduled for real before one is recommended.
What each part is made of
| For | Chosen | Lead | Cost |
|---|---|---|---|
| Fronts | Walnut veneered MDF 19mm 2440x1220
| 28 d | $370 |
| Drawer slide (pair) | Undermount slide soft-close 350mm (pair)
| stock | $72 |
| Edge band, fronts | Walnut veneer edge band 22mm 50m
| 21 d | $55 |
| Edge band, carcass | ABS edge band 1mm white 22mm 200m
| stock | $28 |
| Finish | Clear lacquer matt
| stock | $20 |
| Handle | Bar handle 320mm stainless
1 alternative
| stock | $15 |
| Backs | HDF 3mm white 2800x2070 back panel
3 alternatives
| stock | $14 |
| Wall hanging bracket | Wall hanging bracket
| stock | $11 |
| Confirmat screw | Confirmat screw 7x50
| stock | $2 |
| Panel connector | Panel connector
| stock | $1 |
| Carcass | MFC 18mm white 2800x2070
3 alternatives
| stock | $0 |
| Drawer boxes | MFC 18mm white 2800x2070
3 alternatives
| stock | $0 |
Cutting
Guillotine cuts with the saw's kerf, grain kept, remnants first. Dots are holes (green on the top face). The same layouts for the saw or CNC: nesting.dxf.
| Part | Name | Material | L × W | Qty | Edges | Holes |
|---|---|---|---|---|---|---|
| Ab01-SL | Left side | MFC18-WH | 450 × 400 | 1 | 1 | 8 |
| Ab01-SR | Right side | MFC18-WH | 450 × 400 | 1 | 1 | 8 |
| Ab01-BT | Bottom | MFC18-WH | 764 × 400 | 1 | 1 | 4 |
| Ab01-TP | Top (show face) | VEN19-WAL | 764 × 400 | 1 | 1 | 4 |
| Ab01-BK | Back | HDF3-WH | 446 × 796 | 1 | – | – |
| Ab01-F1 | Drawer front | VEN19-WAL | 797 × 447 | 1 | 4 | 2 |
| Ab01-X1S | Drawer side | MFC18-WH | 350 × 220 | 2 | 1 | 6 |
| Ab01-X1F | Drawer box front | MFC18-WH | 708 × 220 | 1 | 1 | 6 |
| Ab01-X1R | Drawer box back | MFC18-WH | 708 × 220 | 1 | 1 | 4 |
| Ab01-X1B | Drawer bottom | HDF3-WH | 350 × 738 | 1 | – | – |
| Ab01-EP | End panel | VEN19-WAL | 450 × 420 | 1 | 2 | 4 |
| Ab02-SL | Left side | MFC18-WH | 450 × 400 | 1 | 1 | 8 |
| Ab02-SR | Right side | MFC18-WH | 450 × 400 | 1 | 1 | 8 |
| Ab02-BT | Bottom | MFC18-WH | 764 × 400 | 1 | 1 | 4 |
| Ab02-TP | Top (show face) | VEN19-WAL | 764 × 400 | 1 | 1 | 4 |
| Ab02-BK | Back | HDF3-WH | 446 × 796 | 1 | – | – |
| Ab02-F1 | Drawer front | VEN19-WAL | 797 × 447 | 1 | 4 | 2 |
| Ab02-X1S | Drawer side | MFC18-WH | 350 × 220 | 2 | 1 | 6 |
| Ab02-X1F | Drawer box front | MFC18-WH | 708 × 220 | 1 | 1 | 6 |
| Ab02-X1R | Drawer box back | MFC18-WH | 708 × 220 | 1 | 1 | 4 |
| Ab02-X1B | Drawer bottom | HDF3-WH | 350 × 738 | 1 | – | – |
| Ab03-SL | Left side | MFC18-WH | 450 × 400 | 1 | 1 | 8 |
| Ab03-SR | Right side | MFC18-WH | 450 × 400 | 1 | 1 | 8 |
| Ab03-BT | Bottom | MFC18-WH | 764 × 400 | 1 | 1 | 4 |
| Ab03-TP | Top (show face) | VEN19-WAL | 764 × 400 | 1 | 1 | 4 |
| Ab03-BK | Back | HDF3-WH | 446 × 796 | 1 | – | – |
| Ab03-F1 | Drawer front | VEN19-WAL | 797 × 447 | 1 | 4 | 2 |
| Ab03-X1S | Drawer side | MFC18-WH | 350 × 220 | 2 | 1 | 6 |
| Ab03-X1F | Drawer box front | MFC18-WH | 708 × 220 | 1 | 1 | 6 |
| Ab03-X1R | Drawer box back | MFC18-WH | 708 × 220 | 1 | 1 | 4 |
| Ab03-X1B | Drawer bottom | HDF3-WH | 350 × 738 | 1 | – | – |
| Ab03-EP | End panel | VEN19-WAL | 450 × 420 | 1 | 2 | 4 |
cutlist.csv has every part's edges, edge band, holes and operations.
Drilling
152 holes in 29 parts, 7 patterns, on the 32 mm system. Each is in the cutting DXF on its tool's layer.
Seen from face A (the show face, or a side's inside): green holes go in from A, orange from B, purple into an edge (as long as they're deep). Every pattern on one sheet: drilling.svg.
| Face | x | y | Ø | Depth | For |
|---|
x along the part's length from its W1 end, y across from its L1 edge, in mm. All holes: drilling.csv.
Hardware and metal
Everything bought in that isn't a board, by item: how many, for which units, and whether it's on the shelf.
| Kind | Item | Qty | Stock | Buy | Used in |
|---|---|---|---|---|---|
| Drawer slides | Undermount slide soft-close 350mm (pair) SLD-UM-350 | 3 pair | 3 | – | Ab01×1 Ab02×1 Ab03×1 |
| Fixings | Confirmat screw 7x50 CON-CONF | 48 each | 48 | – | Ab01×16 Ab02×16 Ab03×16 |
| Fixings | Panel connector CON-PNL | 8 each | 8 | – | Ab01×4 Ab03×4 |
| Fixings | Wall hanging bracket CON-WB | 6 each | 6 | – | Ab01×2 Ab02×2 Ab03×2 |
| Handles | Bar handle 320mm stainless HDL-320-SS | 3 each | 3 | – | Ab01×1 Ab02×1 Ab03×1 |
hardware-list.csv by item, hardware.csv by unit for packing.
Cost and time
Price
| Materials | $594 |
| Labour | $452 |
| Machines | $116 |
| Overhead | $174 |
| Margin | $573 |
| Price | $1,909 |
The shop's own rates, not market prices.
Shop hours
| Cut 35 parts from 8 boards saw | 1.42 h |
| Edge 40 edges edge bander | 0.27 h |
| Drill 152 holes in 29 parts CNC | 0.39 h |
| Assemble 3 units, 3 drawers, hang 0 doors | 2.1 h |
| Lacquer 5.0 m² spray booth | 1.77 h |
| Pack 3 units | 0.5 h |
| Install 3 units and 0 worktops | 3.6 h |
37 days to fitted
Longest: waiting 28 days for Walnut veneered MDF 19mm 2440x1220; 5 days painting and drying.
To order
| Walnut veneered MDF 19mm 2440x1220 Panel Supply Co | 2 sheet | 28 d |
| Walnut veneer edge band 22mm 50m Panel Supply Co | 1 roll | 21 d |
Into BXNode
bxnode-handoff.json: 11 BOM lines, 9 stock reservations, purchase requests to 1 supplier, 7 work orders and the quotation draft.
Files
Cut list, drilling and hardware as CSV; drawings as SVG; cutting layouts as DXF for the saw or CNC; the 3D model as OBJ and the scene bxd renders; and the hand-off for BXNode.