vekvik
Bathroom vanity: the units in the room, rendered from the design in the materials chosen
Path traced by bxd from the job's model: every panel, front, handle and worktop as designed, in the chosen materials. The room and its light are scenery.

Bathroom vanity

Bathroom vanity 1200mm, white gloss, soft-close drawers

Price
$519
Days to fitted
4
From stock
100%
Boards
2
43% used

Balanced materials, recommended. The best balance of the brief's priorities: $519, 4 days, 100% of materials from stock.

A requirement that doesn't bend. It's a bathroom, so every board must be moisture-resistant: gloss is weighed, but the moisture-resistant white board in stock wins over a gloss one that isn't.

Download the production packEvery file

Overview

  1. 1ReadThe sentence as a brief, every guess listed.
  2. 2Fit1 unit on 1 wall, clear of doors and windows.
  3. 3ChooseFour material plans weighed; balanced recommended.
  4. 4Cut2 boards, 43% used.
  5. 5Drill84 holes in 17 parts.
  6. 6Price$519, 4 days.

What Vekvik read

MakevanityRoom2000 × 1800 × 2600 mmRun1200 mmStyleslabTierstandardFrontswhite, glossAppliancessinkMust bemoisture-resistantWeighscost 30 · time 25 · stock 20 · fit 25

Assumed, for the shop to correct

  • Ceiling height assumed 2600 mm.
Nothing to check beyond the draft itself.

Design

1 unit on 1 wall. Pick a unit on the drawings or in the list to see its parts, holes and hardware.

Ab01A · 2000B · 1800C · 2000D · 1800
Wall A · 2000 mmAb01 · 1200

Materials

Four plans, one recommended

PlanPriceDaysStockFit
Balanced$5194100%96%
Lowest cost = Balanced$5194100%96%
Fastest = Balanced$5194100%96%
Most from stock = Balanced$5194100%96%

The best balance of the brief's priorities: $519, 4 days, 100% of materials from stock.

Requirements are hard; cost, lead time, the shop's stock and fit are weighed. Each plan is nested, priced and scheduled for real before one is recommended.

What each part is made of

ForChosenLeadCost
Drawer slide (pair)Undermount slide soft-close 400mm (pair)
  • 2 pair from stock
stock$48
Edge band, carcassABS edge band 1mm white 22mm 200m
  • white, as asked
  • 1 roll from stock
stock$28
Edge band, frontsABS edge band 1mm white 22mm 200m
  • white, as asked
  • 1 roll from stock
stock$28
BacksHDF 3mm white moisture-resistant 2800x2070
  • white, as asked
  • 1 sheet from stock
stock$21
HandleBar handle 320mm stainless
  • stainless, as asked
  • 2 each from stock
1 alternative
  • Bar handle 320mm black: $12, in stock
stock$10
Wall hanging bracketWall hanging bracket
  • 2 each from stock
stock$4
Panel connectorPanel connector
  • 8 each from stock
stock$1
Confirmat screwConfirmat screw 7x50
  • 24 each from stock
stock$1
CarcassMFC 18mm white moisture-resistant 2800x2070
  • white, as asked
  • shares boards with another part of the job
1 alternative
  • MDF 18mm moisture-resistant 2440x1220 paint grade: $52, in stock
stock$0
FrontsMFC 18mm white moisture-resistant 2800x2070
  • white, as asked
  • shares boards with another part of the job
stock$0
Drawer boxesMFC 18mm white moisture-resistant 2800x2070
  • shares boards with another part of the job
  • fits on boards already counted for another part
stock$0

Cutting

Parts20Boards2Used43% on averageRemnants to keep4

Guillotine cuts with the saw's kerf, grain kept, remnants first. Dots are holes (green on the top face). The same layouts for the saw or CNC: nesting.dxf.

PartNameMaterialL × WQtyEdgesHoles
Ab01-SLLeft sideMFC18-WH-MR500 × 4501110
Ab01-SRRight sideMFC18-WH-MR500 × 4501110
Ab01-BTBottomMFC18-WH-MR1164 × 450114
Ab01-RLTop rail (front and back)MFC18-WH-MR1164 × 100212
Ab01-BKBackHDF3-WH-MR496 × 11961––
Ab01-F1Drawer frontMFC18-WH-MR1197 × 247142
Ab01-X1SDrawer sideMFC18-WH-MR400 × 197216
Ab01-X1FDrawer box frontMFC18-WH-MR1108 × 197116
Ab01-X1RDrawer box backMFC18-WH-MR1108 × 197114
Ab01-X1BDrawer bottomHDF3-WH-MR400 × 11381––
Ab01-F2Drawer frontMFC18-WH-MR1197 × 247142
Ab01-X2SDrawer sideMFC18-WH-MR400 × 197216
Ab01-X2FDrawer box frontMFC18-WH-MR1108 × 197116
Ab01-X2RDrawer box backMFC18-WH-MR1108 × 197114
Ab01-X2BDrawer bottomHDF3-WH-MR400 × 11381––
Ab01-EPEnd panelMFC18-WH-MR500 × 470224

cutlist.csv has every part's edges, edge band, holes and operations.

Drilling

84 holes in 17 parts, 8 patterns, on the 32 mm system. Each is in the cutting DXF on its tool's layer.

confirmat24confirmat edge24slide fixing8slide8panel connector8handle4front fixing4hanging bracket4

Seen from face A (the show face, or a side's inside): green holes go in from A, orange from B, purple into an edge (as long as they're deep). Every pattern on one sheet: drilling.svg.

FacexyØDepthFor

x along the part's length from its W1 end, y across from its L1 edge, in mm. All holes: drilling.csv.

Hardware and metal

Everything bought in that isn't a board, by item: how many, for which units, and whether it's on the shelf.

KindItemQtyStockBuyUsed in
Drawer slidesUndermount slide soft-close 400mm (pair) SLD-UM-4002 pair2–Ab01×2
FixingsConfirmat screw 7x50 CON-CONF24 each24–Ab01×24
FixingsPanel connector CON-PNL8 each8–Ab01×8
FixingsWall hanging bracket CON-WB2 each2–Ab01×2
HandlesBar handle 320mm stainless HDL-320-SS2 each2–Ab01×2

hardware-list.csv by item, hardware.csv by unit for packing.

Cost and time

Price

Materials$149
Labour$141
Machines$26
Overhead$47
Margin$156
Price$519

The shop's own rates, not market prices.

Shop hours

Cut 20 parts from 2 boards saw0.47 h
Edge 25 edges edge bander0.17 h
Drill 84 holes in 17 parts CNC0.22 h
Assemble 1 units, 2 drawers, hang 0 doors0.9 h
Pack 1 units0.17 h
Install 1 units and 0 worktops1.2 h

4 days to fitted

shop 3fit 1

Longest: 3 days in the shop.

To order

Nothing: it all comes from stock.

Into BXNode

bxnode-handoff.json: 8 BOM lines, 8 stock reservations, no purchase requests, 6 work orders and the quotation draft.

Files

Cut list, drilling and hardware as CSV; drawings as SVG; cutting layouts as DXF for the saw or CNC; the 3D model as OBJ and the scene bxd renders; and the hand-off for BXNode.