40 wardrobes for a hotel
40 identical 2.4m wardrobes for a hotel, oak, from our stock, in 8 weeks
- Price, 40 sets
- $69,490 $1,737 a set
- Days to fitted
- 41 meets the 56-day deadline
- From stock
- 30%
- Boards
- 301 72% used
Lowest cost materials, recommended. Lowest cost. Against the balanced mix it is $197 less, the same 41 days, 2 points less from stock.
A repeated job from one sentence: 40 sets. The shop asked to use its stock, but stock covers only part of a run this size; the oldest oak boards go first and the rest is ordered.
Overview
- 1ReadThe sentence as a brief, every guess listed.
- 2Fit3 units on 1 wall, clear of doors and windows.
- 3ChooseFour material plans weighed; lowest cost recommended.
- 4Cut301 boards, 72% used.
- 5Drill25,120 holes in 1560 parts.
- 6Price$69,490, 41 days.
What Vekvik read
Assumed, for the shop to correct
- Ceiling height assumed 2600 mm.
- Wardrobes 2400 mm tall on a 100 mm plinth; the 100 mm above is closed with a top filler.
Design
3 units on 1 wall, in each of 40 rooms. Pick a unit on the drawings or in the list to see its parts, holes and hardware.
Materials
Four plans, one recommended
| Plan | Price | Days | Stock | Fit |
|---|---|---|---|---|
| Balanced | $69,687 | 41 | 32% | 93% |
| Lowest cost | $69,490 | 41 | 30% | 95% |
| Fastest = Lowest cost | $69,490 | 41 | 30% | 95% |
| Most from stock | $69,924 | 41 | 33% | 91% |
Lowest cost. Against the balanced mix it is $197 less, the same 41 days, 2 points less from stock.
Requirements are hard; cost, lead time, the shop's stock and fit are weighed. Each plan is nested, priced and scheduled for real before one is recommended.
What each part is made of
| For | Chosen | Lead | Cost |
|---|---|---|---|
| Carcass | MFC 18mm white 2800x2070
3 alternatives
| 5 d | $6,240 |
| Fronts | MFC 18mm natural oak 2800x2070
1 alternative
| 7 d | $4,292 |
| Concealed hinge, 110° | Clip hinge 110 soft-close
| 5 d | $3,840 |
| Drawer slide (pair) | Undermount slide soft-close 500mm (pair)
| 14 d | $2,880 |
| Backs | HDF 3mm white 2800x2070 back panel
3 alternatives
| stock | $840 |
| Edge band, fronts | ABS edge band 1mm natural oak 22mm 100m
1 alternative
| 7 d | $805 |
| Handle | Bar handle 160mm stainless
2 alternatives
| 7 d | $768 |
| Handle | Bar handle 320mm stainless
1 alternative
| 7 d | $588 |
| Drawer boxes | MFC 16mm white 2800x2070
3 alternatives
| stock | $504 |
| Adjustable leg | Adjustable leg 100-150mm
| 5 d | $456 |
| Hanging rail | Oval wardrobe rail chrome 3000mm
| 3 d | $243 |
| Edge band, carcass | ABS edge band 1mm white 22mm 200m
| stock | $224 |
| Confirmat screw | Confirmat screw 7x50
| stock | $102 |
| Rail support | Rail support chrome
| 5 d | $96 |
| Plinth clip | Plinth clip
| stock | $72 |
| Shelf pin | Shelf pin 5mm
| stock | $24 |
| Panel connector | Panel connector
| stock | $24 |
Cutting
Guillotine cuts with the saw's kerf, grain kept, remnants first. Dots are holes (green on the top face). The same layouts for the saw or CNC: nesting.dxf.
| Part | Name | Material | L × W | Qty | Edges | Holes |
|---|---|---|---|---|---|---|
| At01-FL | Scribe filler | MFC18-OAK | 2400 × 50 | 40 | 1 | – |
| At02-SL | Left side | MFC18-WH | 2400 × 580 | 40 | 1 | 18 |
| At02-SR | Right side | MFC18-WH | 2400 × 580 | 40 | 1 | 18 |
| At02-BT | Bottom | MFC18-WH | 754 × 580 | 40 | 1 | 8 |
| At02-TP | Top | MFC18-WH | 754 × 580 | 40 | 1 | 4 |
| At02-BK | Back | HDF3-WH | 2396 × 786 | 40 | – | – |
| At02-FS | Fixed shelf | MFC18-WH | 754 × 560 | 40 | 1 | 4 |
| At02-DL | Left door | MFC18-OAK | 2397 × 392 | 40 | 4 | 17 |
| At02-DR | Right door | MFC18-OAK | 2397 × 392 | 40 | 4 | 17 |
| At03-SL | Left side | MFC18-WH | 2400 × 580 | 40 | 1 | 26 |
| At03-SR | Right side | MFC18-WH | 2400 × 580 | 40 | 1 | 26 |
| At03-BT | Bottom | MFC18-WH | 754 × 580 | 40 | 1 | 8 |
| At03-TP | Top | MFC18-WH | 754 × 580 | 40 | 1 | 4 |
| At03-BK | Back | HDF3-WH | 2396 × 786 | 40 | – | – |
| At03-FS1 | Fixed shelf | MFC18-WH | 754 × 560 | 40 | 1 | 4 |
| At03-FS2 | Fixed shelf | MFC18-WH | 754 × 560 | 40 | 1 | 4 |
| At03-F1 | Drawer front | MFC18-OAK | 787 × 171 | 40 | 4 | 2 |
| At03-X1S | Drawer side | MFC16-WH | 500 × 121 | 80 | 1 | 6 |
| At03-X1F | Drawer box front | MFC16-WH | 694 × 121 | 40 | 1 | 6 |
| At03-X1R | Drawer box back | MFC16-WH | 694 × 121 | 40 | 1 | 4 |
| At03-X1B | Drawer bottom | HDF3-WH | 500 × 724 | 40 | – | – |
| At03-F2 | Drawer front | MFC18-OAK | 787 × 249 | 40 | 4 | 2 |
| At03-X2S | Drawer side | MFC16-WH | 500 × 199 | 80 | 1 | 6 |
| At03-X2F | Drawer box front | MFC16-WH | 694 × 199 | 40 | 1 | 6 |
| At03-X2R | Drawer box back | MFC16-WH | 694 × 199 | 40 | 1 | 4 |
| At03-X2B | Drawer bottom | HDF3-WH | 500 × 724 | 40 | – | – |
| At03-F3 | Drawer front | MFC18-OAK | 787 × 291 | 40 | 4 | 2 |
| At03-X3S | Drawer side | MFC16-WH | 500 × 220 | 80 | 1 | 6 |
| At03-X3F | Drawer box front | MFC16-WH | 694 × 220 | 40 | 1 | 6 |
| At03-X3R | Drawer box back | MFC16-WH | 694 × 220 | 40 | 1 | 4 |
| At03-X3B | Drawer bottom | HDF3-WH | 500 × 724 | 40 | – | – |
| At03-DL | Left door | MFC18-OAK | 2397 × 392 | 40 | 4 | 17 |
| At03-DR | Right door | MFC18-OAK | 2397 × 392 | 40 | 4 | 17 |
| At04-SL | Left side | MFC18-WH | 2400 × 580 | 40 | 1 | 152 |
| At04-SR | Right side | MFC18-WH | 2400 × 580 | 40 | 1 | 152 |
| At04-BT | Bottom | MFC18-WH | 754 × 580 | 40 | 1 | 8 |
| At04-TP | Top | MFC18-WH | 754 × 580 | 40 | 1 | 4 |
| At04-BK | Back | HDF3-WH | 2396 × 786 | 40 | – | – |
| At04-SH | Shelf | MFC18-WH | 752 × 550 | 200 | 1 | – |
| At04-FS | Fixed shelf | MFC18-WH | 754 × 560 | 40 | 1 | 4 |
| At04-DL | Left door | MFC18-OAK | 2397 × 392 | 40 | 4 | 17 |
| At04-DR | Right door | MFC18-OAK | 2397 × 392 | 40 | 4 | 17 |
| At04-EP | End panel | MFC18-OAK | 2500 × 600 | 40 | 2 | 4 |
| At-PL | Plinth | MFC18-OAK | 2400 × 95 | 40 | 1 | 6 |
| At-TF | Top filler | MFC18-OAK | 2400 × 120 | 40 | 1 | – |
cutlist.csv has every part's edges, edge band, holes and operations.
Drilling
25,120 holes in 1560 parts (40 sets), 22 patterns, on the 32 mm system. Each is in the cutting DXF on its tool's layer.
Seen from face A (the show face, or a side's inside): green holes go in from A, orange from B, purple into an edge (as long as they're deep). Every pattern on one sheet: drilling.svg.
| Face | x | y | Ø | Depth | For |
|---|
x along the part's length from its W1 end, y across from its L1 edge, in mm. All holes: drilling.csv.
Hardware and metal
Everything bought in that isn't a board, by item: how many, for which units, and whether it's on the shelf.
| Kind | Item | Qty | Stock | Buy | Used in |
|---|---|---|---|---|---|
| Drawer slides | Undermount slide soft-close 500mm (pair) SLD-UM-500 | 120 pair | 10 | 110 | At03×120 |
| Fixings | Confirmat screw 7x50 CON-CONF | 2560 each | 2560 | – | At02×480 At03×1600 At04×480 |
| Fixings | Panel connector CON-PNL | 160 each | 160 | – | At04×160 |
| Fixings | Plinth clip CON-PC | 240 each | 240 | – | At×240 |
| Fixings | Shelf pin 5mm PIN-5 | 800 each | 800 | – | At04×800 |
| Handles | Bar handle 160mm stainless HDL-160-SS | 240 each | 150 | 90 | At02×80 At03×80 At04×80 |
| Handles | Bar handle 320mm stainless HDL-320-SS | 120 each | 30 | 90 | At03×120 |
| Hinges | Clip hinge 110 soft-close HNG-SC | 1200 each | 300 | 900 | At02×400 At03×400 At04×400 |
| Legs and feet | Adjustable leg 100-150mm LEG-ADJ | 480 each | 400 | 80 | At02×160 At03×160 At04×160 |
| Wardrobe fittings | Oval wardrobe rail chrome 3000mm RAIL-OVL | 27 bar | 20 | 7 | At02×40 At03×40 |
| Wardrobe fittings | Rail support chrome RS-CHR | 160 each | 100 | 60 | At02×80 At03×80 |
Bars as cut
| Bar | Pieces | Offcut |
|---|---|---|
| RAIL-OVL #1 · 3000 mm | At02-RL.1 752, At02-RL.2 752, At02-RL.3 752 | 732 |
| RAIL-OVL #2 · 3000 mm | At02-RL.4 752, At02-RL.5 752, At02-RL.6 752 | 732 |
| RAIL-OVL #3 · 3000 mm | At02-RL.7 752, At02-RL.8 752, At02-RL.9 752 | 732 |
| RAIL-OVL #4 · 3000 mm | At02-RL.10 752, At02-RL.11 752, At02-RL.12 752 | 732 |
| RAIL-OVL #5 · 3000 mm | At02-RL.13 752, At02-RL.14 752, At02-RL.15 752 | 732 |
| RAIL-OVL #6 · 3000 mm | At02-RL.16 752, At02-RL.17 752, At02-RL.18 752 | 732 |
| RAIL-OVL #7 · 3000 mm | At02-RL.19 752, At02-RL.20 752, At02-RL.21 752 | 732 |
| RAIL-OVL #8 · 3000 mm | At02-RL.22 752, At02-RL.23 752, At02-RL.24 752 | 732 |
| RAIL-OVL #9 · 3000 mm | At02-RL.25 752, At02-RL.26 752, At02-RL.27 752 | 732 |
| RAIL-OVL #10 · 3000 mm | At02-RL.28 752, At02-RL.29 752, At02-RL.30 752 | 732 |
| RAIL-OVL #11 · 3000 mm | At02-RL.31 752, At02-RL.32 752, At02-RL.33 752 | 732 |
| RAIL-OVL #12 · 3000 mm | At02-RL.34 752, At02-RL.35 752, At02-RL.36 752 | 732 |
| RAIL-OVL #13 · 3000 mm | At02-RL.37 752, At02-RL.38 752, At02-RL.39 752 | 732 |
| RAIL-OVL #14 · 3000 mm | At02-RL.40 752, At03-RL.1 752, At03-RL.2 752 | 732 |
| RAIL-OVL #15 · 3000 mm | At03-RL.3 752, At03-RL.4 752, At03-RL.5 752 | 732 |
| RAIL-OVL #16 · 3000 mm | At03-RL.6 752, At03-RL.7 752, At03-RL.8 752 | 732 |
| RAIL-OVL #17 · 3000 mm | At03-RL.9 752, At03-RL.10 752, At03-RL.11 752 | 732 |
| RAIL-OVL #18 · 3000 mm | At03-RL.12 752, At03-RL.13 752, At03-RL.14 752 | 732 |
| RAIL-OVL #19 · 3000 mm | At03-RL.15 752, At03-RL.16 752, At03-RL.17 752 | 732 |
| RAIL-OVL #20 · 3000 mm | At03-RL.18 752, At03-RL.19 752, At03-RL.20 752 | 732 |
| RAIL-OVL #21 · 3000 mm | At03-RL.21 752, At03-RL.22 752, At03-RL.23 752 | 732 |
| RAIL-OVL #22 · 3000 mm | At03-RL.24 752, At03-RL.25 752, At03-RL.26 752 | 732 |
| RAIL-OVL #23 · 3000 mm | At03-RL.27 752, At03-RL.28 752, At03-RL.29 752 | 732 |
| RAIL-OVL #24 · 3000 mm | At03-RL.30 752, At03-RL.31 752, At03-RL.32 752 | 732 |
| RAIL-OVL #25 · 3000 mm | At03-RL.33 752, At03-RL.34 752, At03-RL.35 752 | 732 |
| RAIL-OVL #26 · 3000 mm | At03-RL.36 752, At03-RL.37 752, At03-RL.38 752 | 732 |
| RAIL-OVL #27 · 3000 mm | At03-RL.39 752, At03-RL.40 752 | 1488 |
What's done to each piece (cut, drilled, welded, coated) is in metal-cutlist.csv.
hardware-list.csv by item, hardware.csv by unit for packing.
Cost and time
Price
| Materials | $22,665 |
| Labour | $16,244 |
| Machines | $3,389 |
| Overhead | $6,345 |
| Margin | $20,847 |
| Price $1,737 a set | $69,490 |
The shop's own rates, not market prices.
Shop hours
| Cut 2080 parts from 301 boards saw | 60.93 h |
| Edge 2960 edges edge bander | 19.73 h |
| Drill 25120 holes in 1560 parts CNC | 32.31 h |
| Assemble 120 units, 120 drawers, hang 0 doors | 84 h |
| Pack 120 units | 20 h |
| Install 120 units and 0 worktops | 144 h |
41 days to fitted
Longest: 18 days in the shop; waiting 14 days for Undermount slide soft-close 500mm (pair).
To order
| MFC 18mm white 2800x2070 Panel Supply Co | 107 sheet | 5 d |
| MFC 18mm natural oak 2800x2070 Panel Supply Co | 58 sheet | 7 d |
| Clip hinge 110 soft-close Fittings Direct | 900 each | 5 d |
| Undermount slide soft-close 500mm (pair) Fittings Direct | 110 pair | 14 d |
| HDF 3mm white 2800x2070 back panel Panel Supply Co | 10 sheet | 3 d |
| ABS edge band 1mm natural oak 22mm 100m Panel Supply Co | 20 roll | 7 d |
| Bar handle 160mm stainless Fittings Direct | 90 each | 7 d |
| Bar handle 320mm stainless Fittings Direct | 90 each | 7 d |
| Adjustable leg 100-150mm Fittings Direct | 80 each | 5 d |
| Oval wardrobe rail chrome 3000mm Fittings Direct | 7 bar | 3 d |
| Rail support chrome Fittings Direct | 60 each | 5 d |
Into BXNode
bxnode-handoff.json: 17 BOM lines, 17 stock reservations, purchase requests to 2 suppliers, 6 work orders and the quotation draft.
Files
Cut list, drilling and hardware as CSV; drawings as SVG; cutting layouts as DXF for the saw or CNC; the 3D model as OBJ and the scene bxd renders; and the hand-off for BXNode.