Shaker kitchen with a quartz worktop
White shaker L-shaped kitchen, 3.6 x 3 m, quartz worktop, dishwasher, in 4 weeks, budget $15k
- Price
- $8,139 within the $15,000 budget
- Days to fitted
- 28 meets the 28-day deadline
- From stock
- 40%
- Boards
- 16 72% used
Balanced materials, recommended. The best balance of the brief's priorities: $8,139, 28 days, 40% of materials from stock.
A deadline and a budget. A quartz worktop is templated once the units are in, so its days are counted, and the plan is chosen on the real schedule, not the fastest single part.
Overview
- 1ReadThe sentence as a brief, every guess listed.
- 2Fit16 units on 2 walls, clear of doors and windows.
- 3ChooseFour material plans weighed; balanced recommended.
- 4Cut16 boards, 72% used.
- 5Drill1,287 holes in 108 parts.
- 6Price$8,139, 28 days.
What Vekvik read
Assumed, for the shop to correct
- Ceiling height assumed 2600 mm.
- Shaker doors are made as painted MDF with a routed frame.
- Not named, so assumed: sink, hob, oven, fridge.
- The fridge's door kit fixes the housing's doors; no hinges counted for them.
- Nesting: Ab-PL (3000 mm) is cut in 2 pieces and jointed.
Design
16 units on 2 walls. Worktops 2970 × 598 mm and 2402 × 598 mm. Pick a unit on the drawings or in the list to see its parts, holes and hardware.
Materials
Four plans, one recommended
| Plan | Price | Days | Stock | Fit |
|---|---|---|---|---|
| Balanced | $8,139 | 28 | 40% | 96% |
| Lowest cost = Balanced | $8,139 | 28 | 40% | 96% |
| Fastest = Balanced | $8,139 | 28 | 40% | 96% |
| Most from stock = Balanced | $8,139 | 28 | 40% | 96% |
The best balance of the brief's priorities: $8,139, 28 days, 40% of materials from stock.
Requirements are hard; cost, lead time, the shop's stock and fit are weighed. Each plan is nested, priced and scheduled for real before one is recommended.
What each part is made of
| For | Chosen | Lead | Cost |
|---|---|---|---|
| Worktop | Quartz worktop 20mm white, fabricated
1 alternative
| 17 d | $1,420 |
| Carcass | MFC 18mm white 2800x2070
3 alternatives
| stock | $240 |
| Fronts | MDF 18mm 2440x1220 paint grade
2 alternatives
| stock | $190 |
| Finish | 2K paint system white (primer and top coat)
1 alternative
| stock | $174 |
| Concealed hinge, 110° | Clip hinge 110 soft-close
| stock | $96 |
| Drawer slide (pair) | Undermount slide soft-close 550mm (pair)
| stock | $96 |
| Handle | Bar handle 160mm stainless
2 alternatives
| stock | $61 |
| Drawer boxes | MFC 16mm white 2800x2070
3 alternatives
| stock | $42 |
| Adjustable leg | Adjustable leg 100-150mm
| stock | $32 |
| Wall hanging bracket | Wall hanging bracket
| stock | $29 |
| Backs | HDF 3mm white 2800x2070 back panel
3 alternatives
| stock | $28 |
| Edge band, carcass | ABS edge band 1mm white 22mm 200m
| stock | $28 |
| Handle | Bar handle 320mm stainless
1 alternative
| stock | $15 |
| Confirmat screw | Confirmat screw 7x50
| stock | $6 |
| Plinth clip | Plinth clip
| stock | $4 |
| Shelf pin | Shelf pin 5mm
| stock | $2 |
| Panel connector | Panel connector
| stock | $2 |
Cutting
Guillotine cuts with the saw's kerf, grain kept, remnants first. Dots are holes (green on the top face). The same layouts for the saw or CNC: nesting.dxf.
| Part | Name | Material | L × W | Qty | Edges | Holes |
|---|---|---|---|---|---|---|
| Ab01-FL | Scribe filler | MDF18 | 720 × 50 | 1 | – | – |
| Ab02-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 36 |
| Ab02-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 40 |
| Ab02-BT | Bottom | MFC18-WH | 964 × 560 | 1 | 1 | 10 |
| Ab02-RL | Top rail (front and back) | MFC18-WH | 964 × 100 | 2 | 1 | 2 |
| Ab02-BK | Back | HDF3-WH | 716 × 996 | 1 | – | – |
| Ab02-SH | Shelf | MFC18-WH | 962 × 530 | 1 | 1 | – |
| Ab02-BP | Blind panel | MDF18 | 717 × 600 | 1 | – | – |
| Ab02-D | Door | MDF18 | 717 × 397 | 1 | – | 8 |
| Ab03-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 8 |
| Ab03-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 8 |
| Ab03-BT | Bottom | MFC18-WH | 764 × 560 | 1 | 1 | 8 |
| Ab03-RL | Top rail (front and back) | MFC18-WH | 764 × 100 | 2 | 1 | 2 |
| Ab03-BK | Back | HDF3-WH | 716 × 796 | 1 | – | – |
| Ab03-DL | Left door | MDF18 | 717 × 397 | 1 | – | 8 |
| Ab03-DR | Right door | MDF18 | 717 × 397 | 1 | – | 8 |
| Ab04-D | Appliance door | MDF18 | 717 × 597 | 1 | – | – |
| Ab05-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 40 |
| Ab05-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 36 |
| Ab05-BT | Bottom | MFC18-WH | 504 × 560 | 1 | 1 | 8 |
| Ab05-RL | Top rail (front and back) | MFC18-WH | 504 × 100 | 2 | 1 | 2 |
| Ab05-BK | Back | HDF3-WH | 716 × 536 | 1 | – | – |
| Ab05-SH | Shelf | MFC18-WH | 502 × 530 | 1 | 1 | – |
| Ab05-D | Door | MDF18 | 717 × 537 | 1 | – | 8 |
| Ab06-SL | Left side | MFC18-WH | 2100 × 560 | 1 | 1 | 6 |
| Ab06-SR | Right side | MFC18-WH | 2100 × 560 | 1 | 1 | 6 |
| Ab06-BT | Bottom | MFC18-WH | 564 × 560 | 1 | 1 | 8 |
| Ab06-TP | Top | MFC18-WH | 564 × 560 | 1 | 1 | 4 |
| Ab06-FS | Fixed shelf | MFC18-WH | 564 × 540 | 1 | 1 | 4 |
| Ab06-D1 | Appliance door | MDF18 | 1152 × 597 | 1 | – | – |
| Ab06-D2 | Appliance door | MDF18 | 942 × 597 | 1 | – | – |
| Ab06-SP | Side panel above the worktop | MDF18 | 1342 × 580 | 1 | – | 4 |
| Ab07-FL | Scribe filler | MDF18 | 2100 × 50 | 1 | – | – |
| Aw01-FL | Scribe filler | MDF18 | 720 × 50 | 1 | – | – |
| Aw02-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| Aw02-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 38 |
| Aw02-BT | Bottom | MFC18-WH | 435 × 320 | 1 | 1 | 4 |
| Aw02-TP | Top | MFC18-WH | 435 × 320 | 1 | 1 | 4 |
| Aw02-BK | Back | HDF3-WH | 716 × 467 | 1 | – | – |
| Aw02-SH | Shelf | MFC18-WH | 433 × 290 | 2 | 1 | – |
| Aw02-D | Door | MDF18 | 717 × 468 | 1 | – | 8 |
| Aw03-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| Aw03-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 38 |
| Aw03-BT | Bottom | MFC18-WH | 435 × 320 | 1 | 1 | 4 |
| Aw03-TP | Top | MFC18-WH | 435 × 320 | 1 | 1 | 4 |
| Aw03-BK | Back | HDF3-WH | 716 × 467 | 1 | – | – |
| Aw03-SH | Shelf | MFC18-WH | 433 × 290 | 2 | 1 | – |
| Aw03-D | Door | MDF18 | 717 × 468 | 1 | – | 8 |
| Aw03-EP | End panel | MDF18 | 720 × 340 | 1 | – | 4 |
| Aw04-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| Aw04-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 38 |
| Aw04-BT | Bottom | MFC18-WH | 423 × 320 | 1 | 1 | 4 |
| Aw04-TP | Top | MFC18-WH | 423 × 320 | 1 | 1 | 4 |
| Aw04-BK | Back | HDF3-WH | 716 × 455 | 1 | – | – |
| Aw04-SH | Shelf | MFC18-WH | 421 × 290 | 2 | 1 | – |
| Aw04-D | Door | MDF18 | 717 × 456 | 1 | – | 8 |
| Aw04-EP | End panel | MDF18 | 720 × 340 | 1 | – | 4 |
| Aw05-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| Aw05-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 38 |
| Aw05-BT | Bottom | MFC18-WH | 423 × 320 | 1 | 1 | 4 |
| Aw05-TP | Top | MFC18-WH | 423 × 320 | 1 | 1 | 4 |
| Aw05-BK | Back | HDF3-WH | 716 × 455 | 1 | – | – |
| Aw05-SH | Shelf | MFC18-WH | 421 × 290 | 2 | 1 | – |
| Aw05-D | Door | MDF18 | 717 × 456 | 1 | – | 8 |
| Db01-FL | Scribe filler | MDF18 | 720 × 50 | 1 | – | – |
| Db02-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 40 |
| Db02-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 40 |
| Db02-BT | Bottom | MFC18-WH | 844 × 560 | 1 | 1 | 10 |
| Db02-RL | Top rail (front and back) | MFC18-WH | 844 × 100 | 2 | 1 | 2 |
| Db02-BK | Back | HDF3-WH | 716 × 876 | 1 | – | – |
| Db02-SH | Shelf | MFC18-WH | 842 × 530 | 1 | 1 | – |
| Db02-DL | Left door | MDF18 | 717 × 437 | 1 | – | 8 |
| Db02-DR | Right door | MDF18 | 717 × 437 | 1 | – | 8 |
| Db03-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 9 |
| Db03-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 9 |
| Db03-BT | Bottom | MFC18-WH | 564 × 560 | 1 | 1 | 8 |
| Db03-RL | Top rail (front and back) | MFC18-WH | 564 × 100 | 2 | 1 | 2 |
| Db03-BK | Back | HDF3-WH | 716 × 596 | 1 | – | – |
| Db03-F1 | Drawer front | MDF18 | 597 × 119 | 1 | – | 2 |
| Db03-X1S | Drawer side | MFC16-WH | 550 × 70 | 2 | 1 | 5 |
| Db03-X1F | Drawer box front | MFC16-WH | 508 × 70 | 1 | 1 | 4 |
| Db03-X1R | Drawer box back | MFC16-WH | 508 × 70 | 1 | 1 | 2 |
| Db03-X1B | Drawer bottom | HDF3-WH | 550 × 538 | 1 | – | – |
| Db03-OS | Oven support | MFC18-WH | 564 × 540 | 1 | 1 | 4 |
| Db04-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 13 |
| Db04-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 13 |
| Db04-BT | Bottom | MFC18-WH | 824 × 560 | 1 | 1 | 10 |
| Db04-RL | Top rail (front and back) | MFC18-WH | 824 × 100 | 2 | 1 | 2 |
| Db04-BK | Back | HDF3-WH | 716 × 856 | 1 | – | – |
| Db04-F1 | Drawer front | MDF18 | 857 × 171 | 1 | – | 2 |
| Db04-X1S | Drawer side | MFC16-WH | 550 × 121 | 2 | 1 | 7 |
| Db04-X1F | Drawer box front | MFC16-WH | 768 × 121 | 1 | 1 | 6 |
| Db04-X1R | Drawer box back | MFC16-WH | 768 × 121 | 1 | 1 | 4 |
| Db04-X1B | Drawer bottom | HDF3-WH | 550 × 798 | 1 | – | – |
| Db04-F2 | Drawer front | MDF18 | 857 × 249 | 1 | – | 2 |
| Db04-X2S | Drawer side | MFC16-WH | 550 × 199 | 2 | 1 | 7 |
| Db04-X2F | Drawer box front | MFC16-WH | 768 × 199 | 1 | 1 | 6 |
| Db04-X2R | Drawer box back | MFC16-WH | 768 × 199 | 1 | 1 | 4 |
| Db04-X2B | Drawer bottom | HDF3-WH | 550 × 798 | 1 | – | – |
| Db04-F3 | Drawer front | MDF18 | 857 × 291 | 1 | – | 2 |
| Db04-X3S | Drawer side | MFC16-WH | 550 × 220 | 2 | 1 | 7 |
| Db04-X3F | Drawer box front | MFC16-WH | 768 × 220 | 1 | 1 | 6 |
| Db04-X3R | Drawer box back | MFC16-WH | 768 × 220 | 1 | 1 | 4 |
| Db04-X3B | Drawer bottom | HDF3-WH | 550 × 798 | 1 | – | – |
| Db05-FL | Corner filler | MDF18 | 720 × 50 | 1 | – | – |
| Dw01-FL | Scribe filler | MDF18 | 720 × 50 | 1 | – | – |
| Dw02-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| Dw02-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| Dw02-BT | Bottom | MFC18-WH | 844 × 320 | 1 | 1 | 4 |
| Dw02-TP | Top | MFC18-WH | 844 × 320 | 1 | 1 | 4 |
| Dw02-BK | Back | HDF3-WH | 716 × 876 | 1 | – | – |
| Dw02-SH | Shelf | MFC18-WH | 842 × 290 | 2 | 1 | – |
| Dw02-DL | Left door | MDF18 | 717 × 437 | 1 | – | 8 |
| Dw02-DR | Right door | MDF18 | 717 × 437 | 1 | – | 8 |
| Dw03-SL | Left side | MFC18-WH | 360 × 320 | 1 | 1 | 10 |
| Dw03-SR | Right side | MFC18-WH | 360 × 320 | 1 | 1 | 6 |
| Dw03-BT | Bottom | MFC18-WH | 564 × 320 | 1 | 1 | 4 |
| Dw03-TP | Top | MFC18-WH | 564 × 320 | 1 | 1 | 4 |
| Dw03-D | Door | MDF18 | 357 × 597 | 1 | – | 8 |
| Dw04-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| Dw04-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 38 |
| Dw04-BT | Bottom | MFC18-WH | 539 × 320 | 1 | 1 | 4 |
| Dw04-TP | Top | MFC18-WH | 539 × 320 | 1 | 1 | 4 |
| Dw04-BK | Back | HDF3-WH | 716 × 571 | 1 | – | – |
| Dw04-SH | Shelf | MFC18-WH | 537 × 290 | 2 | 1 | – |
| Dw04-D | Door | MDF18 | 717 × 572 | 1 | – | 8 |
| Dw05-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| Dw05-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 38 |
| Dw05-BT | Bottom | MFC18-WH | 539 × 320 | 1 | 1 | 4 |
| Dw05-TP | Top | MFC18-WH | 539 × 320 | 1 | 1 | 4 |
| Dw05-BK | Back | HDF3-WH | 716 × 571 | 1 | – | – |
| Dw05-SH | Shelf | MFC18-WH | 537 × 290 | 2 | 1 | – |
| Dw05-D | Door | MDF18 | 717 × 572 | 1 | – | 8 |
| Ab-PL | Plinth | MDF18 | 3000 × 95 | 1 | – | 7 |
| Db-PL | Plinth | MDF18 | 2420 × 95 | 1 | – | 6 |
| At1-WT | Worktop | QTZ20-WH | 2970 × 598 | 1 | – | – |
| Dt1-WT | Worktop | QTZ20-WH | 2402 × 598 | 1 | – | – |
cutlist.csv has every part's edges, edge band, holes and operations.
Drilling
1,287 holes in 108 parts, 60 patterns, on the 32 mm system. Each is in the cutting DXF on its tool's layer.
Seen from face A (the show face, or a side's inside): green holes go in from A, orange from B, purple into an edge (as long as they're deep). Every pattern on one sheet: drilling.svg.
| Face | x | y | Ø | Depth | For |
|---|
x along the part's length from its W1 end, y across from its L1 edge, in mm. All holes: drilling.csv.
Hardware and metal
Everything bought in that isn't a board, by item: how many, for which units, and whether it's on the shelf.
| Kind | Item | Qty | Stock | Buy | Used in |
|---|---|---|---|---|---|
| Drawer slides | Undermount slide soft-close 550mm (pair) SLD-UM-550 | 4 pair | 4 | – | Db03×1 Db04×3 |
| Fixings | Confirmat screw 7x50 CON-CONF | 156 each | 156 | – | Ab02×8 Ab03×8 Ab05×8 Ab06×12 Aw02×8 Aw03×8 Aw04×8 Aw05×8 Db02×8 Db03×16 Db04×32 Dw02×8 Dw03×8 Dw04×8 Dw05×8 |
| Fixings | Panel connector CON-PNL | 12 each | 12 | – | Ab06×4 Aw03×4 Aw04×4 |
| Fixings | Plinth clip CON-PC | 13 each | 13 | – | Ab×7 Db×6 |
| Fixings | Shelf pin 5mm PIN-5 | 68 each | 68 | – | Ab02×4 Ab05×4 Aw02×8 Aw03×8 Aw04×8 Aw05×8 Db02×4 Dw02×8 Dw04×8 Dw05×8 |
| Fixings | Wall hanging bracket CON-WB | 16 each | 16 | – | Aw02×2 Aw03×2 Aw04×2 Aw05×2 Dw02×2 Dw03×2 Dw04×2 Dw05×2 |
| Handles | Bar handle 160mm stainless HDL-160-SS | 19 each | 19 | – | Ab02×1 Ab03×2 Ab04×1 Ab05×1 Ab06×2 Aw02×1 Aw03×1 Aw04×1 Aw05×1 Db02×2 Db03×1 Dw02×2 Dw03×1 Dw04×1 Dw05×1 |
| Handles | Bar handle 320mm stainless HDL-320-SS | 3 each | 3 | – | Db04×3 |
| Hinges | Clip hinge 110 soft-close HNG-SC | 30 each | 30 | – | Ab02×2 Ab03×4 Ab05×2 Aw02×2 Aw03×2 Aw04×2 Aw05×2 Db02×4 Dw02×4 Dw03×2 Dw04×2 Dw05×2 |
| Legs and feet | Adjustable leg 100-150mm LEG-ADJ | 34 each | 34 | – | Ab02×6 Ab03×4 Ab05×4 Ab06×4 Db02×6 Db03×4 Db04×6 |
hardware-list.csv by item, hardware.csv by unit for packing.
Cost and time
Price
| Materials | $2,420 |
| Labour | $2,127 |
| Machines | $407 |
| Overhead | $743 |
| Margin | $2,442 |
| Price | $8,139 |
The shop's own rates, not market prices.
Shop hours
| Cut 152 parts from 16 boards saw | 3.65 h |
| Edge 101 edges edge bander | 0.67 h |
| Drill 1287 holes in 108 parts CNC | 1.91 h |
| Assemble 15 units, 4 drawers, hang 9 doors | 9.2 h |
| Prime and paint 21.0 m² spray booth | 7.34 h |
| Pack 15 units | 2.5 h |
| Install 15 units and 2 worktops | 22 h |
28 days to fitted
Longest: 17 days to template and fabricate the stone worktop after the units are in; 5 days painting and drying.
To order
| Quartz worktop 20mm white, fabricated StoneWorks | 3.37 m2 | 10 d |
Into BXNode
bxnode-handoff.json: 17 BOM lines, 16 stock reservations, purchase requests to 1 supplier, 7 work orders and the quotation draft.
Files
Cut list, drilling and hardware as CSV; drawings as SVG; cutting layouts as DXF for the saw or CNC; the 3D model as OBJ and the scene bxd renders; and the hand-off for BXNode.