A rental flat's kitchen, from a DXF plan
Budget L-shaped kitchen for a rental flat, white, laminate worktop, no dishwasher
- Price
- $4,507
- Days to fitted
- 6
- From stock
- 97%
- Boards
- 12 81% used
Balanced materials, recommended. The best balance of the brief's priorities: $4,507, 6 days, 97% of materials from stock.
A floor plan as a DXF, the way an architect draws one: Vekvik keeps the inner face of each wall, finds the door as a gap, takes the window from its layer, and keeps the door's swing clear.
Overview
- 1ReadThe sentence as a brief, every guess listed.
- 2Fit16 units on 2 walls, clear of doors and windows.
- 3ChooseFour material plans weighed; balanced recommended.
- 4Cut12 boards, 81% used.
- 5Drill1,388 holes in 112 parts.
- 6Price$4,507, 6 days.
What Vekvik read
Assumed, for the shop to correct
- Ceiling height assumed 2600 mm.
- Not named, so assumed: sink, hob, oven, fridge.
- Read 4 walls and 2 openings from the drawing; the Space step checks them against the plan.
- Nesting: W1b-PL (3500 mm) is cut in 2 pieces and jointed.
Design
16 units on 2 walls. Worktops 3470 × 598 mm and 2302 × 598 mm. Pick a unit on the drawings or in the list to see its parts, holes and hardware.
Materials
Four plans, one recommended
| Plan | Price | Days | Stock | Fit |
|---|---|---|---|---|
| Balanced | $4,507 | 6 | 97% | 97% |
| Lowest cost = Balanced | $4,507 | 6 | 97% | 97% |
| Fastest = Balanced | $4,507 | 6 | 97% | 97% |
| Most from stock = Balanced | $4,507 | 6 | 97% | 97% |
The best balance of the brief's priorities: $4,507, 6 days, 97% of materials from stock.
Requirements are hard; cost, lead time, the shop's stock and fit are weighed. Each plan is nested, priced and scheduled for real before one is recommended.
What each part is made of
| For | Chosen | Lead | Cost |
|---|---|---|---|
| Carcass | MFC 18mm white 2800x2070
3 alternatives
| stock | $192 |
| Worktop | Laminate worktop 38mm white 4100x600
2 alternatives
| stock | $170 |
| Fronts | MFC 16mm white 2800x2070
3 alternatives
| stock | $84 |
| Handle | Bar handle 160mm stainless
2 alternatives
| stock | $64 |
| Concealed hinge, 110° | Clip hinge 110 standard
1 alternative
| stock | $42 |
| Adjustable leg | Adjustable leg 100-150mm
| stock | $36 |
| Drawer slide (pair) | Ball-bearing slide 550mm (pair)
1 alternative
| stock | $30 |
| Backs | HDF 3mm white 2800x2070 back panel
3 alternatives
| stock | $28 |
| Edge band, carcass | ABS edge band 1mm white 22mm 200m
| stock | $28 |
| Edge band, fronts | ABS edge band 1mm white 22mm 200m
| stock | $28 |
| Wall hanging bracket | Wall hanging bracket
| stock | $25 |
| Handle | Bar handle 320mm stainless
1 alternative
| stock | $15 |
| Confirmat screw | Confirmat screw 7x50
| stock | $6 |
| Plinth clip | Plinth clip
| stock | $4 |
| Shelf pin | Shelf pin 5mm
| stock | $2 |
| Panel connector | Panel connector
| stock | $1 |
| Drawer boxes | MFC 18mm white 2800x2070
3 alternatives
| stock | $0 |
Cutting
Guillotine cuts with the saw's kerf, grain kept, remnants first. Dots are holes (green on the top face). The same layouts for the saw or CNC: nesting.dxf.
| Part | Name | Material | L × W | Qty | Edges | Holes |
|---|---|---|---|---|---|---|
| W1b01-FL | Scribe filler | MFC16-WH | 720 × 50 | 1 | 1 | – |
| W1b02-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 36 |
| W1b02-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 40 |
| W1b02-BT | Bottom | MFC18-WH | 964 × 560 | 1 | 1 | 10 |
| W1b02-RL | Top rail (front and back) | MFC18-WH | 964 × 100 | 2 | 1 | 2 |
| W1b02-BK | Back | HDF3-WH | 716 × 996 | 1 | – | – |
| W1b02-SH | Shelf | MFC18-WH | 962 × 530 | 1 | 1 | – |
| W1b02-BP | Blind panel | MFC16-WH | 717 × 600 | 1 | 1 | – |
| W1b02-D | Door | MFC16-WH | 717 × 397 | 1 | 4 | 8 |
| W1b03-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 40 |
| W1b03-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 36 |
| W1b03-BT | Bottom | MFC18-WH | 534 × 560 | 1 | 1 | 8 |
| W1b03-RL | Top rail (front and back) | MFC18-WH | 534 × 100 | 2 | 1 | 2 |
| W1b03-BK | Back | HDF3-WH | 716 × 566 | 1 | – | – |
| W1b03-SH | Shelf | MFC18-WH | 532 × 530 | 1 | 1 | – |
| W1b03-D | Door | MFC16-WH | 717 × 567 | 1 | 4 | 8 |
| W1b04-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 8 |
| W1b04-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 8 |
| W1b04-BT | Bottom | MFC18-WH | 764 × 560 | 1 | 1 | 8 |
| W1b04-RL | Top rail (front and back) | MFC18-WH | 764 × 100 | 2 | 1 | 2 |
| W1b04-BK | Back | HDF3-WH | 716 × 796 | 1 | – | – |
| W1b04-DL | Left door | MFC16-WH | 717 × 397 | 1 | 4 | 8 |
| W1b04-DR | Right door | MFC16-WH | 717 × 397 | 1 | 4 | 8 |
| W1b05-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 40 |
| W1b05-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 36 |
| W1b05-BT | Bottom | MFC18-WH | 499 × 560 | 1 | 1 | 8 |
| W1b05-RL | Top rail (front and back) | MFC18-WH | 499 × 100 | 2 | 1 | 2 |
| W1b05-BK | Back | HDF3-WH | 716 × 531 | 1 | – | – |
| W1b05-SH | Shelf | MFC18-WH | 497 × 530 | 1 | 1 | – |
| W1b05-D | Door | MFC16-WH | 717 × 532 | 1 | 4 | 8 |
| W1b06-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 40 |
| W1b06-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 36 |
| W1b06-BT | Bottom | MFC18-WH | 499 × 560 | 1 | 1 | 8 |
| W1b06-RL | Top rail (front and back) | MFC18-WH | 499 × 100 | 2 | 1 | 2 |
| W1b06-BK | Back | HDF3-WH | 716 × 531 | 1 | – | – |
| W1b06-SH | Shelf | MFC18-WH | 497 × 530 | 1 | 1 | – |
| W1b06-D | Door | MFC16-WH | 717 × 532 | 1 | 4 | 8 |
| W1b08-FL | Scribe filler | MFC16-WH | 2100 × 50 | 1 | 1 | – |
| W1w01-FL | Scribe filler | MFC16-WH | 720 × 50 | 1 | 1 | – |
| W1w02-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| W1w02-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| W1w02-BT | Bottom | MFC18-WH | 649 × 320 | 1 | 1 | 4 |
| W1w02-TP | Top | MFC18-WH | 649 × 320 | 1 | 1 | 4 |
| W1w02-BK | Back | HDF3-WH | 716 × 681 | 1 | – | – |
| W1w02-SH | Shelf | MFC18-WH | 647 × 290 | 2 | 1 | – |
| W1w02-DL | Left door | MFC16-WH | 717 × 340 | 1 | 4 | 8 |
| W1w02-DR | Right door | MFC16-WH | 717 × 340 | 1 | 4 | 8 |
| W1w03-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| W1w03-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| W1w03-BT | Bottom | MFC18-WH | 649 × 320 | 1 | 1 | 4 |
| W1w03-TP | Top | MFC18-WH | 649 × 320 | 1 | 1 | 4 |
| W1w03-BK | Back | HDF3-WH | 716 × 681 | 1 | – | – |
| W1w03-SH | Shelf | MFC18-WH | 647 × 290 | 2 | 1 | – |
| W1w03-DL | Left door | MFC16-WH | 717 × 340 | 1 | 4 | 8 |
| W1w03-DR | Right door | MFC16-WH | 717 × 340 | 1 | 4 | 8 |
| W1w03-EP | End panel | MFC16-WH | 720 × 340 | 1 | 2 | 4 |
| W1w04-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| W1w04-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| W1w04-BT | Bottom | MFC18-WH | 834 × 320 | 1 | 1 | 4 |
| W1w04-TP | Top | MFC18-WH | 834 × 320 | 1 | 1 | 4 |
| W1w04-BK | Back | HDF3-WH | 716 × 866 | 1 | – | – |
| W1w04-SH | Shelf | MFC18-WH | 832 × 290 | 2 | 1 | – |
| W1w04-DL | Left door | MFC16-WH | 717 × 432 | 1 | 4 | 8 |
| W1w04-DR | Right door | MFC16-WH | 717 × 432 | 1 | 4 | 8 |
| W1w04-EP | End panel | MFC16-WH | 720 × 340 | 1 | 2 | 4 |
| W4b01-FL | Scribe filler | MFC16-WH | 720 × 50 | 1 | 1 | – |
| W4b02-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 40 |
| W4b02-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 40 |
| W4b02-BT | Bottom | MFC18-WH | 794 × 560 | 1 | 1 | 10 |
| W4b02-RL | Top rail (front and back) | MFC18-WH | 794 × 100 | 2 | 1 | 2 |
| W4b02-BK | Back | HDF3-WH | 716 × 826 | 1 | – | – |
| W4b02-SH | Shelf | MFC18-WH | 792 × 530 | 1 | 1 | – |
| W4b02-DL | Left door | MFC16-WH | 717 × 412 | 1 | 4 | 8 |
| W4b02-DR | Right door | MFC16-WH | 717 × 412 | 1 | 4 | 8 |
| W4b03-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 9 |
| W4b03-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 9 |
| W4b03-BT | Bottom | MFC18-WH | 564 × 560 | 1 | 1 | 8 |
| W4b03-RL | Top rail (front and back) | MFC18-WH | 564 × 100 | 2 | 1 | 2 |
| W4b03-BK | Back | HDF3-WH | 716 × 596 | 1 | – | – |
| W4b03-F1 | Drawer front | MFC16-WH | 597 × 119 | 1 | 4 | 2 |
| W4b03-X1S | Drawer side | MFC18-WH | 550 × 70 | 2 | 1 | 5 |
| W4b03-X1F | Drawer box front | MFC18-WH | 508 × 70 | 1 | 1 | 4 |
| W4b03-X1R | Drawer box back | MFC18-WH | 508 × 70 | 1 | 1 | 2 |
| W4b03-X1B | Drawer bottom | HDF3-WH | 550 × 538 | 1 | – | – |
| W4b03-OS | Oven support | MFC18-WH | 564 × 540 | 1 | 1 | 4 |
| W4b04-SL | Left side | MFC18-WH | 720 × 560 | 1 | 1 | 13 |
| W4b04-SR | Right side | MFC18-WH | 720 × 560 | 1 | 1 | 13 |
| W4b04-BT | Bottom | MFC18-WH | 774 × 560 | 1 | 1 | 10 |
| W4b04-RL | Top rail (front and back) | MFC18-WH | 774 × 100 | 2 | 1 | 2 |
| W4b04-BK | Back | HDF3-WH | 716 × 806 | 1 | – | – |
| W4b04-F1 | Drawer front | MFC16-WH | 807 × 171 | 1 | 4 | 2 |
| W4b04-X1S | Drawer side | MFC18-WH | 550 × 121 | 2 | 1 | 7 |
| W4b04-X1F | Drawer box front | MFC18-WH | 718 × 121 | 1 | 1 | 6 |
| W4b04-X1R | Drawer box back | MFC18-WH | 718 × 121 | 1 | 1 | 4 |
| W4b04-X1B | Drawer bottom | HDF3-WH | 550 × 748 | 1 | – | – |
| W4b04-F2 | Drawer front | MFC16-WH | 807 × 249 | 1 | 4 | 2 |
| W4b04-X2S | Drawer side | MFC18-WH | 550 × 199 | 2 | 1 | 7 |
| W4b04-X2F | Drawer box front | MFC18-WH | 718 × 199 | 1 | 1 | 6 |
| W4b04-X2R | Drawer box back | MFC18-WH | 718 × 199 | 1 | 1 | 4 |
| W4b04-X2B | Drawer bottom | HDF3-WH | 550 × 748 | 1 | – | – |
| W4b04-F3 | Drawer front | MFC16-WH | 807 × 291 | 1 | 4 | 2 |
| W4b04-X3S | Drawer side | MFC18-WH | 550 × 220 | 2 | 1 | 7 |
| W4b04-X3F | Drawer box front | MFC18-WH | 718 × 220 | 1 | 1 | 6 |
| W4b04-X3R | Drawer box back | MFC18-WH | 718 × 220 | 1 | 1 | 4 |
| W4b04-X3B | Drawer bottom | HDF3-WH | 550 × 748 | 1 | – | – |
| W4b05-FL | Corner filler | MFC16-WH | 720 × 50 | 1 | 1 | – |
| W4w01-FL | Scribe filler | MFC16-WH | 720 × 50 | 1 | 1 | – |
| W4w02-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| W4w02-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| W4w02-BT | Bottom | MFC18-WH | 794 × 320 | 1 | 1 | 4 |
| W4w02-TP | Top | MFC18-WH | 794 × 320 | 1 | 1 | 4 |
| W4w02-BK | Back | HDF3-WH | 716 × 826 | 1 | – | – |
| W4w02-SH | Shelf | MFC18-WH | 792 × 290 | 2 | 1 | – |
| W4w02-DL | Left door | MFC16-WH | 717 × 412 | 1 | 4 | 8 |
| W4w02-DR | Right door | MFC16-WH | 717 × 412 | 1 | 4 | 8 |
| W4w03-SL | Left side | MFC18-WH | 360 × 320 | 1 | 1 | 10 |
| W4w03-SR | Right side | MFC18-WH | 360 × 320 | 1 | 1 | 6 |
| W4w03-BT | Bottom | MFC18-WH | 564 × 320 | 1 | 1 | 4 |
| W4w03-TP | Top | MFC18-WH | 564 × 320 | 1 | 1 | 4 |
| W4w03-D | Door | MFC16-WH | 357 × 597 | 1 | 4 | 8 |
| W4w04-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| W4w04-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 38 |
| W4w04-BT | Bottom | MFC18-WH | 514 × 320 | 1 | 1 | 4 |
| W4w04-TP | Top | MFC18-WH | 514 × 320 | 1 | 1 | 4 |
| W4w04-BK | Back | HDF3-WH | 716 × 546 | 1 | – | – |
| W4w04-SH | Shelf | MFC18-WH | 512 × 290 | 2 | 1 | – |
| W4w04-D | Door | MFC16-WH | 717 × 547 | 1 | 4 | 8 |
| W4w05-SL | Left side | MFC18-WH | 720 × 320 | 1 | 1 | 42 |
| W4w05-SR | Right side | MFC18-WH | 720 × 320 | 1 | 1 | 38 |
| W4w05-BT | Bottom | MFC18-WH | 514 × 320 | 1 | 1 | 4 |
| W4w05-TP | Top | MFC18-WH | 514 × 320 | 1 | 1 | 4 |
| W4w05-BK | Back | HDF3-WH | 716 × 546 | 1 | – | – |
| W4w05-SH | Shelf | MFC18-WH | 512 × 290 | 2 | 1 | – |
| W4w05-D | Door | MFC16-WH | 717 × 547 | 1 | 4 | 8 |
| W1b-PL | Plinth | MFC16-WH | 3500 × 95 | 1 | 1 | 8 |
| W4b-PL | Plinth | MFC16-WH | 2320 × 95 | 1 | 1 | 6 |
| W1t1-WT | Worktop | WT38-WH | 3470 × 598 | 1 | – | – |
| W4t1-WT | Worktop | WT38-WH | 2302 × 598 | 1 | – | – |
cutlist.csv has every part's edges, edge band, holes and operations.
Drilling
1,388 holes in 112 parts, 62 patterns, on the 32 mm system. Each is in the cutting DXF on its tool's layer.
Seen from face A (the show face, or a side's inside): green holes go in from A, orange from B, purple into an edge (as long as they're deep). Every pattern on one sheet: drilling.svg.
| Face | x | y | Ø | Depth | For |
|---|
x along the part's length from its W1 end, y across from its L1 edge, in mm. All holes: drilling.csv.
Hardware and metal
Everything bought in that isn't a board, by item: how many, for which units, and whether it's on the shelf.
| Kind | Item | Qty | Stock | Buy | Used in |
|---|---|---|---|---|---|
| Drawer slides | Ball-bearing slide 550mm (pair) SLD-BB-550 | 4 pair | 4 | – | W4b03×1 W4b04×3 |
| Fixings | Confirmat screw 7x50 CON-CONF | 152 each | 152 | – | W1b02×8 W1b03×8 W1b04×8 W1b05×8 W1b06×8 W1w02×8 W1w03×8 W1w04×8 W4b02×8 W4b03×16 W4b04×32 W4w02×8 W4w03×8 W4w04×8 W4w05×8 |
| Fixings | Panel connector CON-PNL | 8 each | 8 | – | W1w03×4 W1w04×4 |
| Fixings | Plinth clip CON-PC | 14 each | 14 | – | W1b×8 W4b×6 |
| Fixings | Shelf pin 5mm PIN-5 | 68 each | 68 | – | W1b02×4 W1b03×4 W1b05×4 W1b06×4 W1w02×8 W1w03×8 W1w04×8 W4b02×4 W4w02×8 W4w04×8 W4w05×8 |
| Fixings | Wall hanging bracket CON-WB | 14 each | 14 | – | W1w02×2 W1w03×2 W1w04×2 W4w02×2 W4w03×2 W4w04×2 W4w05×2 |
| Handles | Bar handle 160mm stainless HDL-160-SS | 20 each | 20 | – | W1b02×1 W1b03×1 W1b04×2 W1b05×1 W1b06×1 W1w02×2 W1w03×2 W1w04×2 W4b02×2 W4b03×1 W4w02×2 W4w03×1 W4w04×1 W4w05×1 |
| Handles | Bar handle 320mm stainless HDL-320-SS | 3 each | 3 | – | W4b04×3 |
| Hinges | Clip hinge 110 standard HNG-STD | 38 each | 38 | – | W1b02×2 W1b03×2 W1b04×4 W1b05×2 W1b06×2 W1w02×4 W1w03×4 W1w04×4 W4b02×4 W4w02×4 W4w03×2 W4w04×2 W4w05×2 |
| Legs and feet | Adjustable leg 100-150mm LEG-ADJ | 38 each | 38 | – | W1b02×6 W1b03×4 W1b04×4 W1b05×4 W1b06×4 W4b02×6 W4b03×4 W4b04×6 |
hardware-list.csv by item, hardware.csv by unit for packing.
Cost and time
Price
| Materials | $746 |
| Labour | $1,801 |
| Machines | $196 |
| Overhead | $412 |
| Margin | $1,352 |
| Price | $4,507 |
The shop's own rates, not market prices.
Shop hours
| Cut 154 parts from 12 boards saw | 3.14 h |
| Edge 207 edges edge bander | 1.38 h |
| Drill 1388 holes in 112 parts CNC | 2.01 h |
| Assemble 15 units, 4 drawers, hang 7 doors | 9 h |
| Pack 15 units | 2.5 h |
| Install 15 units and 2 worktops | 22 h |
6 days to fitted
Longest: 4 days in the shop.
To order
Nothing: it all comes from stock.
Into BXNode
bxnode-handoff.json: 15 BOM lines, 15 stock reservations, no purchase requests, 6 work orders and the quotation draft.
Files
Cut list, drilling and hardware as CSV; drawings as SVG; cutting layouts as DXF for the saw or CNC; the 3D model as OBJ and the scene bxd renders; and the hand-off for BXNode.